compression for blower motor
#1
Gold Member
Gold Member
Thread Starter
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,373
Likes: 0
Received 87 Likes
on
35 Posts
compression for blower motor
whats the best compression for a 540 eagle h beam rods and crank jesel valve train inconnel valves j e pistons, thinking 671 blower need advice ,,,,,,,,,,,,,,,
#2
Registered
Join Date: Oct 2004
Location: medellin colombia, pablo escobar's lil town
Posts: 8,390
Likes: 0
Received 6 Likes
on
4 Posts
Re: compression for blower motor
671 is way too small for a 540, 1071 to 1471 will work for you and 9 to one is the max static compression. give dean gellner or jc a call they will point you in the right direction
#3
Banned
Re: compression for blower motor
depending on the boost level you would like to run and octane of fuel, I would like to see 8.5:1 if you 9.0:1 you can still be safe just keep the boost down 5 PSI or less. At 8.5:1 compression I have run 7-9 PSI of boost with iron heads and have no problems. 30 degrees to 32 on timing. 92 octane with intercoolers.
Thread
Thread Starter
Forum
Replies
Last Post
fantastixvoyage
General Q & A
12
06-19-2007 06:09 AM