IMCO Shorty and Maximus Question
#11
Quent
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Join Date: Oct 2004
Location: Loudon, TN
Posts: 238
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
DrN., I am going to try the IMCO 2" Shortie this week. I have a different situation, Laveycraft cat bow rider, Crockett 935 Hp Whipple. My current set up is Max Machine 1:34 upper and standard IMCO lower.
I hope my 32 BBlades B1 will work ok. I currently get on plane with almost no cavatation (I suppose the extra 500 lbs of bow stuff rolls the boat over as well), acceleration is terrific. Chris Camire at Laveycraft says they are currently putting 2" Shorties on their cat as standard unless requested otherwise.
The reason that I'm trying this is that the boat will reach 100 mph quickly but hits a wall and then needs too much time to get to top speed. I'm inpatient and hope this will help solve that dilema without breaking anything. I'm reminded once again why I don't have twins.
Good luck. I keep you posted. Quent
I hope my 32 BBlades B1 will work ok. I currently get on plane with almost no cavatation (I suppose the extra 500 lbs of bow stuff rolls the boat over as well), acceleration is terrific. Chris Camire at Laveycraft says they are currently putting 2" Shorties on their cat as standard unless requested otherwise.
The reason that I'm trying this is that the boat will reach 100 mph quickly but hits a wall and then needs too much time to get to top speed. I'm inpatient and hope this will help solve that dilema without breaking anything. I'm reminded once again why I don't have twins.
Good luck. I keep you posted. Quent
#12
VIP Member
![Default](/forums/images/icons/icon1.gif)
Everybody keep this thought in mind--
More blades may fix the slip problem, but when you add blades to a prop you also increase stern lift. Baja's need to BOW lift to get to the higher speeds. Just something to think about.
I am going to lower my drive this winter and go back to 4 blade props and work on getting bow lift so I can get to 90 mph.
More blades may fix the slip problem, but when you add blades to a prop you also increase stern lift. Baja's need to BOW lift to get to the higher speeds. Just something to think about.
I am going to lower my drive this winter and go back to 4 blade props and work on getting bow lift so I can get to 90 mph.
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
#13
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
Originally Posted by Smitty
Everybody keep this thought in mind--
More blades may fix the slip problem, but when you add blades to a prop you also increase stern lift. Baja's need to BOW lift to get to the higher speeds. Just something to think about.
I am going to lower my drive this winter and go back to 4 blade props and work on getting bow lift so I can get to 90 mph.
More blades may fix the slip problem, but when you add blades to a prop you also increase stern lift. Baja's need to BOW lift to get to the higher speeds. Just something to think about.
I am going to lower my drive this winter and go back to 4 blade props and work on getting bow lift so I can get to 90 mph.
#14
Registered
Thread Starter
Join Date: Oct 2002
Location: Lake Cumberland, KY
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Artic,
I'll second the 700 HP to get into the 80's with the 272 / Shooter hull.
As of now, I'm looking at the Merc Sportmaster standard length lower and staying with the 4 blade. I know the standard length stock XR worked well as did my previous Bravo 1 outdrive with a hydromotive nose cone. Actually, when I went to the XR drive sans cone, I scrubbed about 2-3 MPH.
I'll second the 700 HP to get into the 80's with the 272 / Shooter hull.
As of now, I'm looking at the Merc Sportmaster standard length lower and staying with the 4 blade. I know the standard length stock XR worked well as did my previous Bravo 1 outdrive with a hydromotive nose cone. Actually, when I went to the XR drive sans cone, I scrubbed about 2-3 MPH.
![EEK!](/forums/images/smilies/eek.gif)
#15
VIP Member
![Default](/forums/images/icons/icon1.gif)
Hey Guys
Don't feel bad. I have 1500 hp and I am only in the mid 80's
I should be 90 or better, I just am happy to be on the water this summer. I will get it dialed in for next year over the winter.
Smitty
Don't feel bad. I have 1500 hp and I am only in the mid 80's
I should be 90 or better, I just am happy to be on the water this summer. I will get it dialed in for next year over the winter.
Smitty
__________________
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
Want your ECU tuned right?? Call Mark at Precision www.pmefi.com
#16
Registered
![](https://www.offshoreonly.com/forums/images/icons/prop.gif)
Join Date: Apr 2005
Location: Cary, ILL
Posts: 557
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Smitty are you looking to sell the 1 inch lowers you have. I am thinking of putting a set on my 30. I know of someone with a 30 with a 1 inch raised x and gets better top end. So im thinking a 1" lower would be perfect for me.
#17
Registered
Thread Starter
Join Date: Oct 2002
Location: Lake Cumberland, KY
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Well, I ordered the Mercury Racing Sportmaster standard length lower and a lab finished 28" Bravo I four blade this morning.
Wish me luck.
Wish me luck.
#19
Registered
![Default](/forums/images/icons/icon1.gif)
Dave, I have a set of standard length sportmasters sitting up in Mike's storage unit. How much did they ding you for on the new one?