TRS and Speedmaster Lowers
#1
Registered
Thread Starter
TRS and Speedmaster Lowers
Does a TRS lower unit mate up with any of the Speedmaster lowers? I heard a #3 and TRS will bolt up at the upper, but I'm clueless as to the lower.
I've got a 1 1/2" spacer that I need to move and need to know what other applications it may fit.
I've got a 1 1/2" spacer that I need to move and need to know what other applications it may fit.
Last edited by Holy Smokes; 09-19-2006 at 08:50 AM.
#3
Registered
Re: TRS and Speedmaster Lowers
The old Speedmaster II used a TRS upper gear case. Speedy II" were @ 2"deeper than a TRS. Your 1.5" spacer would be needed if someone wanted to put a TRS lower in place of the Speedy II.
...FYI, Speedy III and TRS do not mate up in any way.
...FYI, Speedy III and TRS do not mate up in any way.
#4
Registered
Thread Starter
Re: TRS and Speedmaster Lowers
Biggus - thanks for the info.
It baffles me as to why anyone would ever need a spacer for a TRS as they sit so deep in the water to begin with.
Thanks for correcting me on the #3 vs. TRS. Is there any SSM drive that mates to TRS?
It baffles me as to why anyone would ever need a spacer for a TRS as they sit so deep in the water to begin with.
Thanks for correcting me on the #3 vs. TRS. Is there any SSM drive that mates to TRS?
Last edited by Holy Smokes; 05-13-2009 at 01:58 PM.
#5
Registered User
Re: TRS and Speedmaster Lowers
Originally Posted by Holy Smokes
Thanks for correcting me on the #3 vs. TRS. Is there any SSM drive that mates to TRS?
Yes- as posted above- the II uses the same gimble and upper. They're long gone and not many were made to start with. No parts at all- anywhere
#6
Registered
Re: TRS and Speedmaster Lowers
If anyone needs TRS Drives, I have one complete LH with 75 easy lake hours and one RH Upper Case and Lower Case with all of the shafts, needs a rebuild. Both look new. PM for details.
#8
Registered
Re: TRS and Speedmaster Lowers
I PM you back, infact I got PMs from 6 people. Still alot of TRS's out there. Best to have a set of backups. Hard to find ones that don't look like they went to war. No Disappointments.
#10
Registered
Thread Starter
Re: TRS and Speedmaster Lowers
Originally Posted by Lofty
Hmmm, We have a few here in various conditions. Anyone need TRS's?
ORRRRRR.... Anyone need a 1 1/2" spacer for a TRS?