Konrad Drives
#1
Registered
Thread Starter
Konrad Drives
I broke down and bought a set of Konrads for my 1985 Cigarette mistress. I am in the process of installing them now. My motors put out between 650-675HP. I was spinning 25" mirage plus props before inward and they wound the motors to about 4900 RPM. I want to run the RPMs around 5300RPM. The Konrads are also 1.38" shorter and I purchased the ones with nose cones. I was thinking 4 blades. I also installed the drives to spin outward for docking purposes. Any suggestions on props? Experience with Konrads.
Anyone interested in some great parts for a TRS setup, freshwater low hours, here is a link.....no disapointments.
http://search.ebay.com/trs-outdrive_W0QQfkrZ1QQfromZR8
Anyone interested in some great parts for a TRS setup, freshwater low hours, here is a link.....no disapointments.
http://search.ebay.com/trs-outdrive_W0QQfkrZ1QQfromZR8
#4
Registered
Thread Starter
Re: Konrad Drives
I have been working with Biggus and the drives. He was at a Poker Run on SENECA LAKE in June and that's when I decided to go Konrad
Anyone interested in some great parts for a TRS setup, freshwater low hours, here is a link.....no disapointments.
http://search.ebay.com/trs-outdrive_W0QQfkrZ1QQfromZR8
Anyone interested in some great parts for a TRS setup, freshwater low hours, here is a link.....no disapointments.
http://search.ebay.com/trs-outdrive_W0QQfkrZ1QQfromZR8
#6
Registered
Re: Konrad Drives
Oh I'll chime in on this!
Here is the O'Neill Offshore beaked resin bucket. Runs all day in the 90's. Bring 110 and a set of 34's and she'll do better. Would never happen without the Konrads!
Here is the O'Neill Offshore beaked resin bucket. Runs all day in the 90's. Bring 110 and a set of 34's and she'll do better. Would never happen without the Konrads!
#7
Registered
Re: Konrad Drives
And a little Pantera 24 with a snotty 540 in it. This little boat runs 80+ and feels like riding a razor blade down a sheet of ice Still a FUN boat to run and again, never would happen without the Konrad.
#8
Registered
Platinum Member
PS: I used to run a 24 Excalibur 468ci/480hp with a nose coned old style Bravo one, set at 2.5" higher than "Standard" Would almost hit your speed - bottom side of 80, maybe right there in perfect conditions - survived 500 hours of abuse, no bravo prob's.