Reversion?
#1
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
454 420's and after idling i am getting some moisture on plug number 7. If i run with water flowing throu the manifold but not the elbow (dumping into the bilge) plug is dry. If i run water just through the elbow not the maniold i get a wet plug.
Pressure checked the exhaust elbow and cant find any leaks.
Why am i only getting it on one exhaust bank? Exaust is steamy on that bank also . Oil in valve covers is a bit milky.
Mercruiser Gil exhaust
No internal flappers
How do i fix this?
Pressure checked the exhaust elbow and cant find any leaks.
Why am i only getting it on one exhaust bank? Exaust is steamy on that bank also . Oil in valve covers is a bit milky.
Mercruiser Gil exhaust
No internal flappers
How do i fix this?
#4
Registered
Join Date: Dec 2003
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Steamy exhaust means nothing; they can all look steamy, with wet exhaust.
Is the motor coming up to enough temp to vaporize the condensation that is inherant in boat motors?
If in saltwater, could be a corrosion hole in head, ex man or riser,(or are these the SS ones?).
Is the motor coming up to enough temp to vaporize the condensation that is inherant in boat motors?
If in saltwater, could be a corrosion hole in head, ex man or riser,(or are these the SS ones?).
#6
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
how or who can pressure check the elbow? I plugged them up and used a garden hose to pressure check them and saw no leaks (more pressure froma garden hose than the engine at idle)
I pretty much narrowed it down to the elbow. When i run with water running through the manifold only i get no wet plug. When i run water throu the elbow only i get a wet plug.
thanks
I pretty much narrowed it down to the elbow. When i run with water running through the manifold only i get no wet plug. When i run water throu the elbow only i get a wet plug.
thanks
#7
Charter Member # 55
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
I'm 99.9% sure its crack in your exhaust manifold. The stock merc Gil's are famous for this when they are 7-10 years old. Water passes through a hose from the manifold to the riser, so a riser gasket is not an issue.
The stock cam will not revert water. Here's the cam.
http://store.summitracing.com/partde...0&autoview=sku
The stock cam will not revert water. Here's the cam.
http://store.summitracing.com/partde...0&autoview=sku
#8
Charter Member # 55
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
After rereading this I might have to second guess myself.
When you say elbow, do mean the SS riser?????
Is it doing this with the boat in the water???? Everything you said is about it running on a hose. Is the boat sitting at the same attitude/angle as if it was in the water???
If you want ot check the risers, simply switch them from one side to the other and see if the problem follows.
When you say elbow, do mean the SS riser?????
Is it doing this with the boat in the water???? Everything you said is about it running on a hose. Is the boat sitting at the same attitude/angle as if it was in the water???
If you want ot check the risers, simply switch them from one side to the other and see if the problem follows.
#9
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
when i say elbow i mean SS riser.
This is all while it is running on a garden hose, the attitude of the boat is pretty bow up. Not sure if it is sthe same as when the boat is in the water but pretty close. I am guessing the next step is to switch the risers around and see what happens
thanks
This is all while it is running on a garden hose, the attitude of the boat is pretty bow up. Not sure if it is sthe same as when the boat is in the water but pretty close. I am guessing the next step is to switch the risers around and see what happens
thanks