XR coupler ????'s
11-27-2006, 02:25 PM
#11
Registered
Thread Starter
Re: XR coupler ????'s
Originally Posted by Mbam
The inners & flywheel housings are all the same. As Billy says the newer housings have different rear mounts, they DO NOT use the double spring washer like the older ones. If you use the washers the rear of the engine will be about 1/4 inch too high.
I an about a quarter low.
PS, I just received my order from you,thanks for the quick shipping.
Nordic95
11-27-2006, 02:41 PM
#12
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: XR coupler ????'s
We aim to please 
It's metal, part number is 33734
You can see a photo here:
http://www.mercruiserparts.com/partsByNumber.asp
It's metal, part number is 33734
You can see a photo here:
http://www.mercruiserparts.com/partsByNumber.asp
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
11-27-2006, 02:45 PM
#13
Registered
Join Date: Oct 2000
Location: Tucson, Arizona, USA
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Re: XR coupler ????'s
The extra washer is a simple metal washer, fairly thick
but nowhere near 1/4".
But what you're going through seems like what I experienced
before I added the washer.
Not fiber, not lockwasher.
If you order the newest rear mounts you'll see, it's in the
package.
Pesky Varmint
but nowhere near 1/4".
But what you're going through seems like what I experienced
before I added the washer.
Not fiber, not lockwasher.
If you order the newest rear mounts you'll see, it's in the
package.
Pesky Varmint
11-27-2006, 06:05 PM
#14
Registered
Thread Starter
Re: XR coupler ????'s
Originally Posted by Pesky Varmint
The extra washer is a simple metal washer, fairly thick
but nowhere near 1/4".
But what you're going through seems like what I experienced
before I added the washer.
Not fiber, not lockwasher.
If you order the newest rear mounts you'll see, it's in the
package.
Pesky Varmint
but nowhere near 1/4".
But what you're going through seems like what I experienced
before I added the washer.
Not fiber, not lockwasher.
If you order the newest rear mounts you'll see, it's in the
package.
Pesky Varmint
Nordic95
11-27-2006, 08:41 PM
#15
Registered
Thread Starter
Re: XR coupler ????'s
One other thing we noticed and I forgot to mention.When the motor was bolted down,front and rear,we could rotate the fiber washer.Shouldnt the washer be tight between the ears?
Nordic95
Nordic95
