Konrad Ace Install Pictures?
#11
Platinum Member
Platinum Member
Join Date: Mar 2004
Location: Hillsborough,NJ
Posts: 467
Likes: 0
Received 0 Likes
on
0 Posts
Re: Konrad Ace Install Pictures?
Kirk,
I don't have clear photos of the extension box at this time. The box is 8". The boat is covered for the winter. The only things in the bilge would be the transmission.rear engine mount,and a gear oil bottle.
I don't have clear photos of the extension box at this time. The box is 8". The boat is covered for the winter. The only things in the bilge would be the transmission.rear engine mount,and a gear oil bottle.
#12
Registered
Re: Konrad Ace Install Pictures?
Here's a few of the 34' DCB that Dorr's Marine in Windham Maine converted from Teague Platinum drives/Imco boxes to the Konrad Ace system.
#13
Registered
Re: Konrad Ace Install Pictures?
This was a pretty straightforward install. Since this was a driveline installation with the motors/transmissions mounted about 3 feet forward, we did not have to enlarge the existing transom cut-out.
Last edited by Biggus; 12-11-2006 at 08:18 AM.
#14
Registered
Re: Konrad Ace Install Pictures?
The boat runs real nice, no issues at all and has zero vibration. The owner logged about 50 hrs on it last season. It's powered by a pair of Teague 800's best speed so far was 126.0 gps