Bravo Alignment Tool
#21
Registered
Join Date: May 2002
Location: North of the Border
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
#22
Registered
Join Date: May 2002
Location: North of the Border
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
i have to recheck my job .....cause i try my tool in a boat of my brother in-law ...(and we have no difficulty to remove is drive this is why i think the alignment is Ok ) ...and when it`s time to insert the tool ...i am not able to came in the engine coupler ...go figure ....wich measure i have to redone
Last edited by 25 hors la loi; 04-30-2007 at 08:52 AM.
#23
Registered
Join Date: May 2002
Location: North of the Border
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
I don’t know why ....but the beginning of the tool we have 1.118 with your drawing ....and my father go to a boat dealer yesterday ....and he measuring a tool and the measure is 1.010 ...look like we are .108 to big .....i continue my research .....no one have the same concern ???
#24
Were doomed!
Charter Member
Well if you look at my first drawing that shows the two ended tool for Alpha or bravo it shows on the Alpha side that its 1.011 in size on the end....and if you also look at the second pic that shows the update/modifcations at the bottom it reads "The modified 91-57797A3 tool or the new tool 91-805475A1 will align all current Alpha or Bravo models as well as all older engines that used the older 91-57797A3 tool"
So that would lead me to believe that you would need to make you tool to the original alpha side specs WITH the midifcations from the second pic......
So that would lead me to believe that you would need to make you tool to the original alpha side specs WITH the midifcations from the second pic......
__________________
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
#25
Were doomed!
Charter Member
maybe the older Bravo's had slightly different sized couplers??? i dunno
__________________
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
#26
Were doomed!
Charter Member
so maybe the tool needs to look like this:
__________________
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
#27
Registered
Join Date: Jul 2005
Location: Poughkeepsie NY /Ocean City MD
Posts: 373
Likes: 0
Received 0 Likes
on
0 Posts
I sell them.
THIS IS A BRAND NEW "CNC LATHE CREATED " MERCRUISER ENGINE ALIGNMENT TOOL.
GREAT ITEM TO HAVE IN THE GARAGE.
THIS TOOL REPLACES MERCRUISER OEM #91-57797A3, WHEN THIS TOOL WAS AVALIABLE THRU MERCURY IT WAS ALMOST $100.00
THIS IS USED TO CHECK ENGINE COUPLER ALIGNMENT WITH THE GIMBAL BEARING.
PROPER ALIGNMENT PREVENTS WEAR ON THE BEARING,DRIVE AND COUPLER.
FOR USE WITH: MERCRUISER DRIVES 1,1A,1B,1C.ALL#1 DRIVES - ALL BRAVOS - GENERATION 2- PRE ALPHA "R"-ALPHA ONE - ALL OMC COBRA STERNDRIVES - VOLVO SX.
EVERYTIME YOU HAVE THE DRIVE OFF YOU SHOULD CHECK ALIGNMENT OR IF YOU HAVE PULLED OR ADJUSTED THE ENGINE.
THIS TOOL CAN SAVE YOU COSTLY DRIVE REPAIR AND COUPLER REPLACEMENT.
$45.00 plus shipping give me a zip and i will give you a DHL ground price.
Thru Paypal secure for both of us
THIS IS A BRAND NEW "CNC LATHE CREATED " MERCRUISER ENGINE ALIGNMENT TOOL.
GREAT ITEM TO HAVE IN THE GARAGE.
THIS TOOL REPLACES MERCRUISER OEM #91-57797A3, WHEN THIS TOOL WAS AVALIABLE THRU MERCURY IT WAS ALMOST $100.00
THIS IS USED TO CHECK ENGINE COUPLER ALIGNMENT WITH THE GIMBAL BEARING.
PROPER ALIGNMENT PREVENTS WEAR ON THE BEARING,DRIVE AND COUPLER.
FOR USE WITH: MERCRUISER DRIVES 1,1A,1B,1C.ALL#1 DRIVES - ALL BRAVOS - GENERATION 2- PRE ALPHA "R"-ALPHA ONE - ALL OMC COBRA STERNDRIVES - VOLVO SX.
EVERYTIME YOU HAVE THE DRIVE OFF YOU SHOULD CHECK ALIGNMENT OR IF YOU HAVE PULLED OR ADJUSTED THE ENGINE.
THIS TOOL CAN SAVE YOU COSTLY DRIVE REPAIR AND COUPLER REPLACEMENT.
$45.00 plus shipping give me a zip and i will give you a DHL ground price.
Thru Paypal secure for both of us
#28
Registered
Join Date: May 2002
Location: North of the Border
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
#29
Registered
Join Date: May 2007
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
I bought one of the A1 tools and there's no way its going to work with a alpha, I called the shop I bought it from and they say the ones they use in there shop measure out to 1.118. Even the directions that came with tool say it will work with alpha drives. Whats the deal with tool.