Bravo Alignment Tool
#33
Registered
Join Date: May 2002
Location: North of the Border
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
#35
Were doomed!
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
the tool will fit the trs drives.......but theres another piece you still need for it to work....theres a plate that fits on the tool and sits flat against the bell houseing that the outdrive bolts up to....you align the engine so the plate sits flat on the bell housing
__________________
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
-Wally
Money can't buy happiness, but it can buy horsepower. And I've never seen a sad person hauling a$$!
#37
Registered
Join Date: Mar 2004
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I would like to know if you still have alignment tools available? If you do please E-mail me at [email protected] I am fairly sure I have an upper pinion seal leaking and now would be the time to check alignment. sincerely Bill Crum
#39
Registered
![Default](/forums/images/icons/icon1.gif)
is there a difference in alignment tool for a regular coupler and a heavy duty coupler?
I have a merc alignment tool thats about 12 years old and Iam not having any luck getting to go in the heavy duty coupler.
the outdrive slides in with no problem.
I have a merc alignment tool thats about 12 years old and Iam not having any luck getting to go in the heavy duty coupler.
the outdrive slides in with no problem.
#40
Registered
![Default](/forums/images/icons/icon1.gif)
by the way the alignment tool I have is #91-57797