Bravo Alignment Tool
01-01-2007, 11:31 AM
#1
Registered User
Platinum MemberThread Starter
Bravo Alignment Tool
Does anybody have The Detail Dimensions of the alignment tool used for aligning the outdrive to the motor ? If not a part number and good source to buy the tool.
01-01-2007, 01:50 PM
#2
Registered
Re: Bravo Alignment Tool
I sell them.
THIS IS A BRAND NEW "CNC LATHE CREATED " MERCRUISER ENGINE ALIGNMENT TOOL.
GREAT ITEM TO HAVE IN THE GARAGE.
THIS TOOL REPLACES MERCRUISER OEM #91-57797A3, WHEN THIS TOOL WAS AVALIABLE THRU MERCURY IT WAS ALMOST $100.00
THIS IS USED TO CHECK ENGINE COUPLER ALIGNMENT WITH THE GIMBAL BEARING.
PROPER ALIGNMENT PREVENTS WEAR ON THE BEARING,DRIVE AND COUPLER.
FOR USE WITH: MERCRUISER DRIVES 1,1A,1B,1C.ALL#1 DRIVES - ALL BRAVOS - GENERATION 2- PRE ALPHA "R"-ALPHA ONE - ALL OMC COBRA STERNDRIVES - VOLVO SX.
EVERYTIME YOU HAVE THE DRIVE OFF YOU SHOULD CHECK ALIGNMENT OR IF YOU HAVE PULLED OR ADJUSTED THE ENGINE.
THIS TOOL CAN SAVE YOU COSTLY DRIVE REPAIR AND COUPLER REPLACEMENT.
$45.00 plus shipping give me a zip and i will give you a DHL ground price.
Thru Paypal secure for both of us
THIS IS A BRAND NEW "CNC LATHE CREATED " MERCRUISER ENGINE ALIGNMENT TOOL.
GREAT ITEM TO HAVE IN THE GARAGE.
THIS TOOL REPLACES MERCRUISER OEM #91-57797A3, WHEN THIS TOOL WAS AVALIABLE THRU MERCURY IT WAS ALMOST $100.00
THIS IS USED TO CHECK ENGINE COUPLER ALIGNMENT WITH THE GIMBAL BEARING.
PROPER ALIGNMENT PREVENTS WEAR ON THE BEARING,DRIVE AND COUPLER.
FOR USE WITH: MERCRUISER DRIVES 1,1A,1B,1C.ALL#1 DRIVES - ALL BRAVOS - GENERATION 2- PRE ALPHA "R"-ALPHA ONE - ALL OMC COBRA STERNDRIVES - VOLVO SX.
EVERYTIME YOU HAVE THE DRIVE OFF YOU SHOULD CHECK ALIGNMENT OR IF YOU HAVE PULLED OR ADJUSTED THE ENGINE.
THIS TOOL CAN SAVE YOU COSTLY DRIVE REPAIR AND COUPLER REPLACEMENT.
$45.00 plus shipping give me a zip and i will give you a DHL ground price.
Thru Paypal secure for both of us
01-02-2007, 09:55 PM
#6
Registered
Re: Bravo Alignment Tool
Bruce
Might work for you, I know on the regular bravos they stick out a long ways.
Total length is 26 inches.
19" 3/4 usable length up till the knurling/hand grip.
Maybe on the next run i should have some longer ones made up.
Joe
Might work for you, I know on the regular bravos they stick out a long ways.
Total length is 26 inches.
19" 3/4 usable length up till the knurling/hand grip.
Maybe on the next run i should have some longer ones made up.
Joe
01-03-2007, 06:04 AM
#7
Registered
Join Date: Apr 2004
Location: Milwaukee, WI
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
Gold Member
01-03-2007, 08:07 PM
#10
Registered
Re: Bravo Alignment Tool
32 caliber
I usally just do a "buy it now" price on Ebay for $45. and $15. flat rate shipping.
There are other guys that start the bidding low and see what they get. I think those guys are actually making them.
I paid a machine shop to make me up a bunch.
Not sure if it was worth it ,because i don't make much after all the hassle of boxing, shipping, Ebay and Paypal charges.
I usally just do a "buy it now" price on Ebay for $45. and $15. flat rate shipping.
There are other guys that start the bidding low and see what they get. I think those guys are actually making them.
I paid a machine shop to make me up a bunch.
Not sure if it was worth it ,because i don't make much after all the hassle of boxing, shipping, Ebay and Paypal charges.
