38 Fever Drive Set-up
01-03-2007, 11:07 AM
#1
Registered
Thread Starter
Join Date: Oct 2001
Location: omaha,nebraska
Posts: 454
Likes: 0
Received 0 Likes
on
0 Posts
38 Fever Drive Set-up
HAS ANYONE PUT 2 INCH SHORTTIES AND EXTENTION BOXES ON A 99 OR LATE MODEL FEVER WE HAVE A 1999 38 FEVER WITH 900 HP BLOWERMOTORS AND WE ARE LOOKING AT IMCO SC OR KONRADS WITH OR WITHOUT EXTENTION BOXES AND OR 1 INCH OR 2 INCH SHORTIES. NEED SOME ADVICE OR SIMILAR SETUPS. THANK YOU
01-03-2007, 09:43 PM
#3
Registered
Join Date: Feb 2005
Location: long island, newyork
Posts: 2,551
Likes: 0
Received 2 Likes
on
2 Posts
Re: 38 Fever Drive Set-up
he y cat, i did one where we raised the x to 19 1/2 and then used 2" imcos. we ran 750 though. and they were on the transom. another one has i.t.s and 2" shorties and the prop shaft ends up parellel with the bottom. either way fast. but you know them bravos.
01-03-2007, 09:53 PM
#4
Registered
Join Date: Feb 2004
Location: LOTO
Posts: 1,173
Likes: 0
Received 0 Likes
on
0 Posts
Re: 38 Fever Drive Set-up
I am looking forward to doing the same thing with my 35 single step. Currently run stock Bravos with a conservative height with 700 hp.
Throttle Up - what ideas do you have on this subject?
Throttle Up - what ideas do you have on this subject?
