SCE Titan Copper headgaskets ?
01-04-2007, 04:59 PM
#1
Registered
Thread Starter
SCE Titan Copper headgaskets ?
Has anybody had experiance with these ? Good or bad.
I am talking about the Self sealing ( no sealent required )
SCE Titan copper gasket . My block & heads have already been grooved & O-ringed. The shortblock is already togather & head studs are in place so I am not really wanting to tear it down & have the orings milled flat to run an MLS gasket. SCE makes 2 series of the Titan gaskets , 1 for blocks that already have o-rings & 1 that doesn't require them (ICS Titan) . I would ofcourse be using the first one , the regular Titan.
Any feedback would be greatly appritiated.
I am talking about the Self sealing ( no sealent required )
SCE Titan copper gasket . My block & heads have already been grooved & O-ringed. The shortblock is already togather & head studs are in place so I am not really wanting to tear it down & have the orings milled flat to run an MLS gasket. SCE makes 2 series of the Titan gaskets , 1 for blocks that already have o-rings & 1 that doesn't require them (ICS Titan) . I would ofcourse be using the first one , the regular Titan.
Any feedback would be greatly appritiated.
