Plane Silly

Lance, here is a pic of the spacers I had made.

LMAC

Hey Tom,
That looks good, except I can't use a spacer on my manifolds, the risers clamp on.
On my risers, there is a gap between the inner and outer tubes anywhere from 1/8 to 1/4". The bung would have to be welded to both to create a seal. I'm not sure I could get a bead all the way around it on the inside.

LMAC

Is that bung through a "wet" part of the exhaust? I can't really tell from the inside pic.
I just got to studying the picture of my manifold (above) and there may be enough room on the riser, just above the clamp. I believe that is a "dry area", I'll have to pull them apart to find out.

bobl

LMAC, I didn't realize this was you Lance. Thought those numbers sounded familiar. I've got a SSM riser with bung attached you can borrow. Just pay shipping. Are you near Brett in Kansas? He's coming here today, I can send it with him. Call me 830 6935591.

Bob

LMAC

I'm in between you guys, OKC.
Good luck to Brett getting there and back, we are getting hammered with freezing rain and ice. It's supposed to stop sometime Sunday.
Thanks for the offer Bob, I may take you up on that when I get this thing completed. Actually I was thinking of installing a permanent A/F monitor. I've been doing a little research looking for a stand alone system, prices are all over the board. In your opinion, what would be the best system for what I'm wanting to do?

bobl

The Innovate LM-1 is what I use. Very good product at a reasonable price.

RumRunner

The Innovate stuff, or the F.A.S.T. systems are probably the best out there for the money.

LMAC

Thanks guys,
I'll do a little searching for the best deal.

RumRunner

The Innovate stuff has some nice features, and you can always add LC-1's and add more than 1 WBO2.

LMAC

Thanks for the input guys,
I purchased this:
http://www.innovatemotorsports.com/x...bf867f628aa2c8

Come on WARM weather!