Odd Dyno results
#22
Registered
Thread Starter
Join Date: Feb 2004
Location: Edmond, Ok.
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Re: Odd Dyno results
Hey Tom,
That looks good, except I can't use a spacer on my manifolds, the risers clamp on.
On my risers, there is a gap between the inner and outer tubes anywhere from 1/8 to 1/4". The bung would have to be welded to both to create a seal. I'm not sure I could get a bead all the way around it on the inside.
That looks good, except I can't use a spacer on my manifolds, the risers clamp on.
On my risers, there is a gap between the inner and outer tubes anywhere from 1/8 to 1/4". The bung would have to be welded to both to create a seal. I'm not sure I could get a bead all the way around it on the inside.
#23
Registered
Thread Starter
Join Date: Feb 2004
Location: Edmond, Ok.
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Re: Odd Dyno results
I just got to studying the picture of my manifold (above) and there may be enough room on the riser, just above the clamp. I believe that is a "dry area", I'll have to pull them apart to find out.
#24
Registered
Join Date: Oct 2000
Location: Spicewood, Texas USA
Posts: 1,382
Likes: 0
Received 3 Likes
on
2 Posts
Re: Odd Dyno results
LMAC, I didn't realize this was you Lance. Thought those numbers sounded familiar. I've got a SSM riser with bung attached you can borrow. Just pay shipping. Are you near Brett in Kansas? He's coming here today, I can send it with him. Call me 830 6935591.
Bob
Bob
#25
Registered
Thread Starter
Join Date: Feb 2004
Location: Edmond, Ok.
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Re: Odd Dyno results
I'm in between you guys, OKC.
Good luck to Brett getting there and back, we are getting hammered with freezing rain and ice. It's supposed to stop sometime Sunday.
Thanks for the offer Bob, I may take you up on that when I get this thing completed. Actually I was thinking of installing a permanent A/F monitor. I've been doing a little research looking for a stand alone system, prices are all over the board. In your opinion, what would be the best system for what I'm wanting to do?
Good luck to Brett getting there and back, we are getting hammered with freezing rain and ice. It's supposed to stop sometime Sunday.
Thanks for the offer Bob, I may take you up on that when I get this thing completed. Actually I was thinking of installing a permanent A/F monitor. I've been doing a little research looking for a stand alone system, prices are all over the board. In your opinion, what would be the best system for what I'm wanting to do?
#26
Registered
Join Date: Oct 2000
Location: Spicewood, Texas USA
Posts: 1,382
Likes: 0
Received 3 Likes
on
2 Posts
Re: Odd Dyno results
I'm in between you guys, OKC.
Good luck to Brett getting there and back, we are getting hammered with freezing rain and ice. It's supposed to stop sometime Sunday.
Thanks for the offer Bob, I may take you up on that when I get this thing completed. Actually I was thinking of installing a permanent A/F monitor. I've been doing a little research looking for a stand alone system, prices are all over the board. In your opinion, what would be the best system for what I'm wanting to do?
Good luck to Brett getting there and back, we are getting hammered with freezing rain and ice. It's supposed to stop sometime Sunday.
Thanks for the offer Bob, I may take you up on that when I get this thing completed. Actually I was thinking of installing a permanent A/F monitor. I've been doing a little research looking for a stand alone system, prices are all over the board. In your opinion, what would be the best system for what I'm wanting to do?
The Innovate LM-1 is what I use. Very good product at a reasonable price.
#30
Registered
Thread Starter
Join Date: Feb 2004
Location: Edmond, Ok.
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Re: Odd Dyno results
Thanks for the input guys,
I purchased this:
http://www.innovatemotorsports.com/x...bf867f628aa2c8
Come on WARM weather!
I purchased this:
http://www.innovatemotorsports.com/x...bf867f628aa2c8
Come on WARM weather!