Need a set of good cores
#1
Registered
Thread Starter
Join Date: Jan 2004
Location: Channelview, Texas
Posts: 913
Likes: 0
Received 0 Likes
on
0 Posts
Need a set of good cores
454 Mag Heads - casting number 14096188
Anyone have a good set?? Maybe two sets?
PM me with location and $$.
Thanks
Capt Ross
Anyone have a good set?? Maybe two sets?
PM me with location and $$.
Thanks
Capt Ross
#2
Charter Member # 55
Charter Member
JasonSmith has 2 sets listed in the swap shop with a link to an ebay auction.
http://www.offshoreonly.com/classifi...ate=1169170045
http://www.offshoreonly.com/classifi...ate=1169170045
#3
SORE MEMBER
Platinum Member
Join Date: Apr 2004
Location: 29°50'49.74"N 95° 5'17.55"W.......TEXAS
Posts: 6,989
Likes: 0
Received 1 Like
on
1 Post
Ross,
I have had good luck getting cores from Little Bill at Victory marine. Most all of his used stuff has been replaced under factory warranty. I think he buys a lot of it in job lots from mercruiser or their dealers.
With heads plan on crack test, new valves, seats and guides.
We got one bad head and he swapped it out no problem. Some of this stuff looks to be almost brand new, but as stated before it is take offs for warranty so be aware.
I have had good luck getting cores from Little Bill at Victory marine. Most all of his used stuff has been replaced under factory warranty. I think he buys a lot of it in job lots from mercruiser or their dealers.
With heads plan on crack test, new valves, seats and guides.
We got one bad head and he swapped it out no problem. Some of this stuff looks to be almost brand new, but as stated before it is take offs for warranty so be aware.
#4
Registered
Join Date: Jan 2001
Location: elyria ohio usa
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
I have 2 pair -cleaned, valves ground,surfaced,magnafluxed,proffesionaly ported,hard exhaust seats,pressure checked, includes s.s.valves,long rocker studs,guide plates,springs retainers keepers, and seals ready to assembe,or will assemble- fresh water ready to go, nothing further needed! ohio- will ship- will send pics if your interested....Ken [email protected]
Last edited by big jing 2; 02-18-2007 at 02:00 PM.
Thread
Thread Starter
Forum
Replies
Last Post
phughes69
General Boating Discussion
1
04-18-2005 09:44 PM