525 with bigger headers
02-27-2007, 03:44 PM
#1
Registered
Thread Starter
525 with bigger headers
525 EFI with the CMI header package. I am rigging a boat with 525's that is completely setup for big tube headers and tails that came with the boat. I can make the header flange fit, but my question is: Are Big tube headers 2 3/8" too much flow for the 525's?
02-28-2007, 07:26 AM
#2
Registered
My buddy has them on his , sounds bad ass. You will loose a little torque on the bottom end, but worth the sound!
02-28-2007, 07:30 AM
#3
Banned
Gold Member
Join Date: Aug 2002
Location: IL
Posts: 5,660
Likes: 0
Received 0 Likes
on
0 Posts
You really should have big huge blower motors with stupid horsepower for that boat. I don't know what you're thinking! 
Keith and I figured it out, if someone gives you trouble, you just tell them wait here, I'll be right back....
In all seriousness, you are going to enjoy having a performance boat with closed cooling, turn key EFI power. It will be perfect for our little mud puddle.
Keith and I figured it out, if someone gives you trouble, you just tell them wait here, I'll be right back....
In all seriousness, you are going to enjoy having a performance boat with closed cooling, turn key EFI power. It will be perfect for our little mud puddle.
Last edited by Elite Marine; 02-28-2007 at 07:34 AM.
