Removing Factory Controls?
#1
Registered
Thread Starter
Join Date: Aug 2005
Location: Marietta, Ga.
Posts: 777
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I am trying to get the handle off of my Quicksikver control. I was told to look for an allen screw, but have not had any luck. Some info would be greatly appreciated.
Dwayne
Dwayne
#4
![Default](/forums/images/icons/icon1.gif)
(Merc 3000 classic) I believe the allen screw is visible when you move the throttle fwd. the slot will line up with the screw. It is a friction adjustment.
To remove the shifter/throttle lever, you must pull out the neutral button then a nut will be visible to remove the handle
To remove the shifter/throttle lever, you must pull out the neutral button then a nut will be visible to remove the handle
#6
Registered
![Default](/forums/images/icons/icon1.gif)
(Merc 3000 classic) I believe the allen screw is visible when you move the throttle fwd. the slot will line up with the screw. It is a friction adjustment.
To remove the shifter/throttle lever, you must pull out the neutral button then a nut will be visible to remove the handle
To remove the shifter/throttle lever, you must pull out the neutral button then a nut will be visible to remove the handle
#7
Registered
Thread Starter
Join Date: Aug 2005
Location: Marietta, Ga.
Posts: 777
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I found the screw. Someone must have had problems with it backing off, they filled the hole with black silicone. Thanks for all the info. Has any one used the Teleflex controls? I want to upgrade while the interior is out.
Thread
Thread Starter
Forum
Replies
Last Post
onesickpantera
General Boating Discussion
4
08-21-2007 08:20 PM