How much HP
#1
Registered
Thread Starter
Join Date: Jul 2004
Location: Malta - Europe
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
How much HP
I just finished rebuilding my engine and I was wondering what HP should I expect.
502MPI Gen 6
Cam 741
1.8 rollers on intake @ 2.19 Valves
1.7 roller on exhaust @ 1.88 Valves
Cyclone Headers with dry exhaust
reprogram ECM
Short runner intake
Ported heads with tri angle valve seating.
MSD kit
K&N Flame arrestor
Any suggestions.
502MPI Gen 6
Cam 741
1.8 rollers on intake @ 2.19 Valves
1.7 roller on exhaust @ 1.88 Valves
Cyclone Headers with dry exhaust
reprogram ECM
Short runner intake
Ported heads with tri angle valve seating.
MSD kit
K&N Flame arrestor
Any suggestions.
#3
Registered
Thread Starter
Join Date: Jul 2004
Location: Malta - Europe
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
High 500's I was thinking somewhere around 525. Well that's good news. So I should expect high 70's on my 22 scarab.
Last edited by D Harry; 03-09-2007 at 01:45 AM.
#8
Registered
Thread Starter
Join Date: Jul 2004
Location: Malta - Europe
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
Thanks to all that sent their suggestions
Have fun and play safe.
Last edited by D Harry; 03-09-2007 at 01:44 AM.
#9
Registered
Join Date: Jun 2004
Location: Rockford, IL
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
Id guess in the mid 5s too. with the 741 cam are you gonna spin it to 5800ish, isnt that cam good for up to 6000, i suppose your whole setup dictates that too.
a guy locally ran his aound 74 with stock 502 so i would guess right around 80 or more.
b70
a guy locally ran his aound 74 with stock 502 so i would guess right around 80 or more.
b70
#10
Registered
Thread Starter
Join Date: Jul 2004
Location: Malta - Europe
Posts: 159
Likes: 0
Received 0 Likes
on
0 Posts
Eyeburn, close to 80 was my final goal. Now I have to wait until I'll run it and see whats gonna be the end results. I will keep you posted.
Last edited by D Harry; 03-09-2007 at 08:44 AM.