recommended major service areas
#1
Registered
Thread Starter
Join Date: Mar 2005
Location: Where the water meets the oaks 'n Pines in the Sierra Nevada's of NorCal
Posts: 975
Likes: 0
Received 1 Like
on
1 Post
![Default](/forums/images/icons/icon1.gif)
friend just purchased a used 2001 Nordic with a 502 f.i. Bravo 1. Meter shows 50 hrs, very clean. Looks like it has been maintained but no records. It runs runs well-no leaks. We pulled valve covers, no sludge, oil looks fresh. Performed a leak down test and all < 18% and compression is good within 5% of each cylinder at 180lbs
Besides a new oil and filter, what would be the minimum "major service' areas to perform on this boat.
Thank you
Besides a new oil and filter, what would be the minimum "major service' areas to perform on this boat.
Thank you
#2
Registered
Thread Starter
Join Date: Mar 2005
Location: Where the water meets the oaks 'n Pines in the Sierra Nevada's of NorCal
Posts: 975
Likes: 0
Received 1 Like
on
1 Post
![Default](/forums/images/icons/icon1.gif)
Replace:
-oil and filter?
-fuel filter?
-plugs?
-check dist cab for arching corrosion?
-flush drive gear oil by pumping in with synthetic bottom up til complete change?
-sea pump blades?
-grease splines on outdrive into coupler?
-inspect all hoses and belts for cracks and replace if nec?
any thing that I missed?
Thanks
-oil and filter?
-fuel filter?
-plugs?
-check dist cab for arching corrosion?
-flush drive gear oil by pumping in with synthetic bottom up til complete change?
-sea pump blades?
-grease splines on outdrive into coupler?
-inspect all hoses and belts for cracks and replace if nec?
any thing that I missed?
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
zum.offshore.Malta
Fiberglass and Paint
0
12-15-2005 05:57 PM
GNJ2
General Q & A
2
04-20-2004 03:44 PM