Serpentine belt convertion
#1
Registered
Thread Starter
Join Date: Oct 2001
Location: Toledo Oh
Posts: 1,915
Likes: 0
Received 0 Likes
on
0 Posts
Serpentine belt convertion
I'm looking to convert the small block in my 18 Donzi to a serpentine system. Anyone have any leads as to who sells a package for that?
#2
Registered
Join Date: Jul 2006
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
I did mine last winter. I searched all over and could not find anything.The brackets are nothing like a car so dont waste your time there. I finally just got all the part numbers and hit ebay, got lucky and only had to pay full price for a couple of pieces. The alt and pwr steering pump pulleys are standard automotive. Good luck
#4
Marine engines utilize 1968 and older short water pump and pulley arrangement.
You can make up or buy a kit from Summit like one made by March, but be prepared to pay.
You may have to relocate some accessories and or do some plumbing and wiring etc...
Serp belts are availiable in many sizes.
newer Merc. motors are serp. and you can mix and match until you have everything.
There was a guy on here that makes a cog style system , But I forgot the name of the company.
Hope this helps, BBB
You can make up or buy a kit from Summit like one made by March, but be prepared to pay.
You may have to relocate some accessories and or do some plumbing and wiring etc...
Serp belts are availiable in many sizes.
newer Merc. motors are serp. and you can mix and match until you have everything.
There was a guy on here that makes a cog style system , But I forgot the name of the company.
Hope this helps, BBB