Remote drive trim switches/stereo remote
#1
Registered
Thread Starter
Remote drive trim switches/stereo remote
I'm interested in putting a remote switch for the drive tilt on my boat. Anyone know if this is something that can be added? I've seen a couple of new boats with merc powerplants that have this. That could be real handy. Also, i have a non marine sony stereo, i don't suppose there is some universal wired remote that works with that, that could be mounted on the back as well?
#3
Ginger or Mary Ann?
Charter Member
http://www.access-tech.net/productsRemoteCom.htm
The fact your radio is non marine should have no effect.
The fact your radio is non marine should have no effect.
#5
Registered
Thread Starter
Don't know if this is a model radio, but may not work for mine, bummer........
"Full compatibility for SONYŽ RM-X2C and RM-X4S remote control radios "
"Full compatibility for SONYŽ RM-X2C and RM-X4S remote control radios "
#7
Registered
Try these switches for your drives and or tabs,I added a double water proof switch for my drives at the transom and love it for maintance. No climbing in and out of the boat.They also engrave them like merc does from the factory.
http://www.eddiemarine.com/cart/cata...=Switch+Panels
Nordic95
http://www.eddiemarine.com/cart/cata...=Switch+Panels
Nordic95
#8
Registered
Thread Starter
http://www.access-tech.net/productsRemoteCom.htm
The fact your radio is non marine should have no effect.
The fact your radio is non marine should have no effect.
#9
Ginger or Mary Ann?
Charter Member
It was my impression that all Sony radios that had the 1/8" phone remote jack can use the same remotes. I think you have to stay with in the same brand lines.
I'm using a Sony marine remote with display on my Sony head unit (that has the uni-link jack) that does not say they are compatable. Even the Sony tech guy said they won't work together. But they do.
#10
Registered
Thread Starter
Try these switches for your drives and or tabs,I added a double water proof switch for my drives at the transom and love it for maintance. No climbing in and out of the boat.They also engrave them like merc does from the factory.
http://www.eddiemarine.com/cart/cata...=Switch+Panels
Nordic95
http://www.eddiemarine.com/cart/cata...=Switch+Panels
Nordic95