SBC Cam question.
#11
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Thread Starter
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,636
Likes: 0
Received 209 Likes
on
133 Posts
![Default](/forums/images/icons/icon1.gif)
The engine pic was last spring with the dart heads on my non roller stock block, best thing on this boat is I can take the sun deck and rear bench apart to access engine!
#12
Registered
Join Date: Dec 2005
Location: Outlet of Canada Lake, NY
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
245,
In case you wanted some Merc comparrison info, the following is from Merc HP 377 EFI stroker service manual:
- 350HP
- 9:1 comp ratio
- Lunati Crank 4.0 X 3.75
- Cam w/1.5:1 Roller rockers: Lift: .510/.530 Dur@50: 222/230
- Vortec Heads - small valve (must be modified)
If you'd like more info, just ask and will try to find it.
In case you wanted some Merc comparrison info, the following is from Merc HP 377 EFI stroker service manual:
- 350HP
- 9:1 comp ratio
- Lunati Crank 4.0 X 3.75
- Cam w/1.5:1 Roller rockers: Lift: .510/.530 Dur@50: 222/230
- Vortec Heads - small valve (must be modified)
If you'd like more info, just ask and will try to find it.
#13
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Thread Starter
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,636
Likes: 0
Received 209 Likes
on
133 Posts
![Default](/forums/images/icons/icon1.gif)
245,
In case you wanted some Merc comparrison info, the following is from Merc HP 377 EFI stroker service manual:
- 350HP
- 9:1 comp ratio
- Lunati Crank 4.0 X 3.75
- Cam w/1.5:1 Roller rockers: Lift: .510/.530 Dur@50: 222/230
- Vortec Heads - small valve (must be modified)
If you'd like more info, just ask and will try to find it.
In case you wanted some Merc comparrison info, the following is from Merc HP 377 EFI stroker service manual:
- 350HP
- 9:1 comp ratio
- Lunati Crank 4.0 X 3.75
- Cam w/1.5:1 Roller rockers: Lift: .510/.530 Dur@50: 222/230
- Vortec Heads - small valve (must be modified)
If you'd like more info, just ask and will try to find it.
#14
Registered
![Default](/forums/images/icons/icon1.gif)
Good looking boat! When you keep up with them and keep full length covers to keep the sun from baking the gelcoat they stay nice even 20+ years later.
I think you'll be more than happy with the new motor. I just converted to a hyd roller setup and it's well worth it over the flat tappet cams.
I think you'll be more than happy with the new motor. I just converted to a hyd roller setup and it's well worth it over the flat tappet cams.
#15
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Thread Starter
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,636
Likes: 0
Received 209 Likes
on
133 Posts
![Default](/forums/images/icons/icon1.gif)
Good looking boat! When you keep up with them and keep full length covers to keep the sun from baking the gelcoat they stay nice even 20+ years later.
I think you'll be more than happy with the new motor. I just converted to a hyd roller setup and it's well worth it over the flat tappet cams.
I think you'll be more than happy with the new motor. I just converted to a hyd roller setup and it's well worth it over the flat tappet cams.