496 Dyno testing and myth busting!
#141
Registered
Join Date: Nov 2006
Location: Middle of the high desert
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I was kicking around the idea of CMI's (for the sound and bling as I don't really care about the extra 1-2 mph) but my mechanic recommended I leave it alone. The boat is kept on a lift and he felt the turbulators were a good thing.
#142
Registered
Join Date: Oct 2006
Location: Michigan
Posts: 1,449
Likes: 0
Received 0 Likes
on
0 Posts
#143
Registered
Join Date: Nov 2006
Location: Middle of the high desert
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I'm certainly no expert and he was talking over my head half the time, but the way he explained it was you're more likely to get condensation when the boat is stored on the water. The turbulators are there to collect and burn off condensation before it gets back into the motor....at least I think that's what he was telling me.
#144
Registered
![Default](/forums/images/icons/icon1.gif)
I'm certainly no expert and he was talking over my head half the time, but the way he explained it was you're more likely to get condensation when the boat is stored on the water. The turbulators are there to collect and burn off condensation before it gets back into the motor....at least I think that's what he was telling me.
#145
Registered
Join Date: Nov 2006
Location: Middle of the high desert
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
That's my understanding as well; if you only boat in warm weather it isn't an issue. In my case we actually do go out in cool weather sometimes, was in the high 30's to low 40's last Sunday when we got on the water.
#146
Registered
Join Date: Jan 2004
Location: San Diego, California
Posts: 2,777
Likes: 0
Received 6 Likes
on
6 Posts
![Wink](/forums/images/icons/icon12.gif)
No, thats correct, turbulators are there to collect condensation and burn it off when the engine is restarted.
A boat slipped or stored over water, especially around salt water where the condensation can build up and drip down onto the stock iron head valves and such that are steel and not stainless.
This type of condensation buildup can rust exhaust valves, intake valves, valve faces, valve seats and cylinder walls and quickly damage an engine with compression loss, sticking valves and such.
If your boat is a trailer queen that gets flushed after every use and is stored dry then the turbulators can usually go with no real problems from condensation.
Best Regards,
Ray @ Raylar
A boat slipped or stored over water, especially around salt water where the condensation can build up and drip down onto the stock iron head valves and such that are steel and not stainless.
This type of condensation buildup can rust exhaust valves, intake valves, valve faces, valve seats and cylinder walls and quickly damage an engine with compression loss, sticking valves and such.
If your boat is a trailer queen that gets flushed after every use and is stored dry then the turbulators can usually go with no real problems from condensation.
Best Regards,
Ray @ Raylar
#147
Registered
![Default](/forums/images/icons/icon1.gif)
I have been reading this thread and the tubulator rings are located under the riser. you can remove the riser ,remove the rings and reinstall with new gaskets. This is similar to gutting a catalytic converter.
#148
Registered
Join Date: Oct 2006
Location: Michigan
Posts: 1,449
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
No, thats correct, turbulators are there to collect condensation and burn it off when the engine is restarted.
A boat slipped or stored over water, especially around salt water where the condensation can build up and drip down onto the stock iron head valves and such that are steel and not stainless.
This type of condensation buildup can rust exhaust valves, intake valves, valve faces, valve seats and cylinder walls and quickly damage an engine with compression loss, sticking valves and such.
If your boat is a trailer queen that gets flushed after every use and is stored dry then the turbulators can usually go with no real problems from condensation.
Best Regards,
Ray @ Raylar
A boat slipped or stored over water, especially around salt water where the condensation can build up and drip down onto the stock iron head valves and such that are steel and not stainless.
This type of condensation buildup can rust exhaust valves, intake valves, valve faces, valve seats and cylinder walls and quickly damage an engine with compression loss, sticking valves and such.
If your boat is a trailer queen that gets flushed after every use and is stored dry then the turbulators can usually go with no real problems from condensation.
Best Regards,
Ray @ Raylar
So do I really need them? I boat only during summer months...May thru Sep.....boat is stored on hoist.....inland fresh water. I have been debating the new CMI's but would I expect to possibly see some damage?
#149
Registered
Join Date: Jan 2004
Location: San Diego, California
Posts: 2,777
Likes: 0
Received 6 Likes
on
6 Posts
![Wink](/forums/images/icons/icon12.gif)
If it were my boat and it sat on a lift over the water for a few months or so, fresh or salt, and it had stock iron heads I would leave the turbulators in.
Get our Raylar aluminum heads with our special valves, seats and guides and you won't need turbulators at all!
You'll also have a lot more power!
Put CMI's on a Merc 496 with captains call, silent choice etc, or drop type s-tubes to clear intergrated transoms and I can just about guaranty stock iron head valve and cylinder water and rust damage.
Best Regards,
Ray @ Raylar
Get our Raylar aluminum heads with our special valves, seats and guides and you won't need turbulators at all!
You'll also have a lot more power!
Put CMI's on a Merc 496 with captains call, silent choice etc, or drop type s-tubes to clear intergrated transoms and I can just about guaranty stock iron head valve and cylinder water and rust damage.
Best Regards,
Ray @ Raylar
#150
Registered
Join Date: Nov 2006
Location: Middle of the high desert
Posts: 221
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Thanks for your input Ray! You may have saved me a lot of trouble down the road....and a good down payment on a Raylar package if I still have this boat when the warranty runs out.
![Ernaehrung004](/forums/images/smilies/ernaehrung004.gif)
Thread
Thread Starter
Forum
Replies
Last Post
JIMKID Motorsports
General Boating Discussion
10
08-12-2010 06:09 PM
Waterfoul
General Boating Discussion
0
02-15-2002 07:59 PM