3/8 stainless line with NPT ends??
#1
Gold Member
Gold Member
Thread Starter
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,635
Likes: 0
Received 204 Likes
on
132 Posts
3/8 stainless line with NPT ends??
I am looking for a flexible 3/8 stainless steel line with 3/8 NPT ends already on it, hopefully a swivel type, I am adding an oil cooler to my small block, I have the cooler and the block for filter, just looking for lines now, anyone know who may have something like that?
#3
Gold Member
Gold Member
Thread Starter
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,635
Likes: 0
Received 204 Likes
on
132 Posts
I might, I actually found something on ebay that may work
http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MEWA:IT
http://cgi.ebay.com/ws/eBayISAPI.dll...e=STRK:MEWA:IT
#7
Banned
No doubt, You need a cooler with 1/2" NPT bungs on it. If this is for engine oil, you will also want to plumb in -10 Aeroquip style fitting and hose. You can run a "push lock" style hose which is a bit less expensive and works well. I have most of what you need in stock. You know how to find me...
#8
Gold Member
Gold Member
Join Date: Mar 2003
Location: Grosse ile michigan
Posts: 2,373
Likes: 0
Received 87 Likes
on
35 Posts
How big is the cooler, diameter and length........When running oil lines it is always better to run at least a # 10 hose. the price difference between a push lock and a regular end is a little more exspensive but worth piece of mind..........Plus if you upgrade engine performance you already have the oil system up to par......The push locks scare me.....If ya use them i would hose clamp them......