Morse cable ends...
05-19-2007, 01:42 PM
#1
Charter Member
Charter MemberThread Starter
Join Date: Oct 2000
Location: Richmond, VA
Posts: 1,679
Likes: 0
Received 0 Likes
on
0 Posts
Morse cable ends...
Where can I buy the end that goes on a Morse 33C cable where it attaches to a k-plane? (used for the indicators) I previously used a pivot-ball like you would use to attach a throttle cable to a carb, but it rusted and I'd like to find a stainless one...
__________________
Steve Gresham
'03 Donzi 33ZX
Steve Gresham
'03 Donzi 33ZX
05-19-2007, 03:52 PM
#2
Registered
Join Date: Feb 2005
Location: long island, newyork
Posts: 2,551
Likes: 0
Received 2 Likes
on
2 Posts
a few tricks....
buy a small length of fiberglass rod. cut it. drill it. tap it 10/32 thread. machine( or grind a flat surface onto one side of the opposite end tapped)and install.
use a mercury throttle/ shift cable end.
use a an alternate material other than the glass rod.
good luck
p.s or call mercury and get the original kiekafer ends.
buy a small length of fiberglass rod. cut it. drill it. tap it 10/32 thread. machine( or grind a flat surface onto one side of the opposite end tapped)and install.
use a mercury throttle/ shift cable end.
use a an alternate material other than the glass rod.
good luck
p.s or call mercury and get the original kiekafer ends.
05-19-2007, 07:17 PM
#3
Registered
Join Date: Dec 2005
Location: Middletown, Ct. 06457
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
05-20-2007, 09:32 AM
#5
OSO Moderator
Charter Member
__________________
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
05-21-2007, 04:42 AM
#6
Platinum Member
Platinum Member
Join Date: Nov 2002
Location: LONG ISLAND/LAKE MURRAY
Posts: 2,399
Likes: 0
Received 1 Like
on
1 Post
I know exactly what your looking for. Its the old design and may be obsolete. If that is the case I may have one some where but God knows where. Let me know if ya can't locate them from Bam & wll look for it in the meantime.
