fuel pump/sea water pump
06-03-2007, 08:02 AM
#1
Charter Member
Charter MemberThread Starter
Join Date: Oct 2000
Location: richmond virginia
Posts: 1,353
Likes: 0
Received 0 Likes
on
0 Posts
fuel pump/sea water pump
Any one know what the flow rate of the Fuel pump that
monuts on the sea water pump on the Gen 5 blocks, will it
support 650 to 700 hp. I would like to get rid of my electric fuel pump and crank driven water pump and go to a more simpler system, What would be my best set from tank to dominator carb and also supply water to the engine. I am running a water pump bypass.
monuts on the sea water pump on the Gen 5 blocks, will it
support 650 to 700 hp. I would like to get rid of my electric fuel pump and crank driven water pump and go to a more simpler system, What would be my best set from tank to dominator carb and also supply water to the engine. I am running a water pump bypass.
__________________
"If Things Seem Under Control, You're Not Going Fast Enough"
Mario Andretti
"If Things Seem Under Control, You're Not Going Fast Enough"
Mario Andretti
06-03-2007, 08:20 AM
#2
Registered
I wanna say flow rate is 120 at 7. But you can adapt any fuel pump you want to the sea pump by just using the base (arm) of the old fuel pump bolted to a new fuel pump.
Last edited by jdub; 06-03-2007 at 08:23 AM.
06-03-2007, 08:26 AM
#3
06-04-2007, 10:17 PM
#5
Platinum Member
Platinum Member
The CV pump bolts on the Merc seawater pump. It is expensive, but will feed 700hp easily. It is also rebuildable. They put the correct fuel pump arm on their Nascar billet pumps.
06-05-2007, 07:18 AM
#6
Charter Member
Charter MemberThread Starter
Join Date: Oct 2000
Location: richmond virginia
Posts: 1,353
Likes: 0
Received 0 Likes
on
0 Posts
What is CV pump, how do i find them?
thanks, Eddie
thanks, Eddie
__________________
"If Things Seem Under Control, You're Not Going Fast Enough"
Mario Andretti
"If Things Seem Under Control, You're Not Going Fast Enough"
Mario Andretti
06-05-2007, 11:18 PM
#7
Charter Member
Charter Member
Join Date: Oct 2000
Location: Central, Ohio USA
Posts: 1,074
Likes: 0
Received 0 Likes
on
0 Posts
I have run CV pumps for 6 years on my 625 HP enignes. They work great. I did replace the gaskets once when they upgraded them.
Here's a link.
http://www.cvproducts.com/cv/
Here's a link.
http://www.cvproducts.com/cv/
Thread
Thread Starter
Forum
Replies
Last Post
BillR
General Q & A
11
07-29-2022 07:31 AM
