500hp Gurus !!!
#11
VIP Member
VIP Member
#13
Registered
Join Date: May 2007
Location: Linwood, Saginaw Bay
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
Bravo 1's on Stelling boxes, 1.5 gears.
29p Quad IV's hit the rev limiter of 5600 at 87 mph... with about 2 inches of unused throttle.
I have a problem with the stbd. drive, currently, but when that is resolved Julie at Throttles-Up has sent me a set of CNC 29p 5 blades to try.
29p Quad IV's hit the rev limiter of 5600 at 87 mph... with about 2 inches of unused throttle.
I have a problem with the stbd. drive, currently, but when that is resolved Julie at Throttles-Up has sent me a set of CNC 29p 5 blades to try.
#14
Registered
Join Date: May 2007
Location: Linwood, Saginaw Bay
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
Tyler got around 100 hp from simply doing the new Dart heads and a port job. The cam and MSD were icing on the cake... The dyno showed the MSD alone added 12 more hp.
#15
Bravo 1's on Stelling boxes, 1.5 gears.
29p Quad IV's hit the rev limiter of 5600 at 87 mph... with about 2 inches of unused throttle.
I have a problem with the stbd. drive, currently, but when that is resolved Julie at Throttles-Up has sent me a set of CNC 29p 5 blades to try.
29p Quad IV's hit the rev limiter of 5600 at 87 mph... with about 2 inches of unused throttle.
I have a problem with the stbd. drive, currently, but when that is resolved Julie at Throttles-Up has sent me a set of CNC 29p 5 blades to try.
#19
VIP Member
VIP Member
#20
VIP Member
VIP Member