Mech. fuel pump question
#1
Registered
Thread Starter
![Default](/forums/images/icons/icon1.gif)
Does anybody have a mech. fuel pump shaft laying around so they can measure it? I need to make two shafts, need to know the O.D. and the length. THANKS
#4
Registered
![Default](/forums/images/icons/icon1.gif)
Kama,
The shafts are the same, but at $14 each from GM, I dont know if its worth the trouble of trying to make them. I am certain that they are hardened and I think the ends have a slight radius on them like a lifter. I just bought a new one yesterday from my local Chevy dealer but its already installed in the engine. I do have an old one I can measure Thursday if you really want to try and make one.
Bill Koustenis
Advanced Automotive Machine
Waldorf Md
The shafts are the same, but at $14 each from GM, I dont know if its worth the trouble of trying to make them. I am certain that they are hardened and I think the ends have a slight radius on them like a lifter. I just bought a new one yesterday from my local Chevy dealer but its already installed in the engine. I do have an old one I can measure Thursday if you really want to try and make one.
Bill Koustenis
Advanced Automotive Machine
Waldorf Md