Compression Numbers (in psi) to determine blower compatibility
#1
Registered
Thread Starter
Compression Numbers (in psi) to determine blower compatibility
Looking for a way to determine if an engine (that is complete) is compatible for supercharging. it would seem that using a compression guage to obtain actual compression numbers might be a way to do this. Anyone know if it works and/or the numbers that work with a blower? Say under 150psi is ok, etc.
I am trying to run a small weiand blower from a 525sc and don't really want to tear down the motor to do a compression "ratio" calculation.
I am trying to run a small weiand blower from a 525sc and don't really want to tear down the motor to do a compression "ratio" calculation.
#4
Registered
Thread Starter
Wish I had a 7.5:1 and a 10:1 to compare....
#5
Registered
Join Date: Feb 2007
Location: Battlefield, MO
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
There is some corralation between cylinder compression and comp ratio, however;Compression (PSI) in each cylinder, is not the same as the compression ratio of an engine...compression in a cylinder is basically determined by the ring sealing ability and the valve sealing ability...compression RATIO is determined by the piston geometry and the head dome cc's...among other things like head gasket thickness and rod length & cam timing....
#6
Registered
Thread Starter
There is some corralation between cylinder compression and comp ratio, however;Compression (PSI) in each cylinder, is not the same as the compression ratio of an engine...compression in a cylinder is basically determined by the ring sealing ability and the valve sealing ability...compression RATIO is determined by the piston geometry and the head dome cc's...among other things like head gasket thickness and rod length & cam timing....
#7
Registered
Join Date: Feb 2007
Location: Battlefield, MO
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
It is different for each engine..take an engine that has 10:1 compression and one that has 7.5:1 and you might see the same cylinder pressure or you might not.....but take an engine that has 7.5 compression ratio with 120PSI cylinder pressure and raise the compression ratio, your cylinder pressure will raise as well, just because of mathmatics.....to know wether or not you have an engine that is a good candidate for a blower application, you must first know what the static compression is..just like Steve said
#8
Registered
Join Date: Feb 2007
Location: Battlefield, MO
Posts: 268
Likes: 0
Received 0 Likes
on
0 Posts
(Quote from Fantastixvoyage)
"I am trying to run a small weiand blower from a 525sc and don't really want to tear down the motor to do a compression "ratio" calculation.."
Well, I understand your unwillingness to tear down a perfectly good engine, but it might be time well spent if you find out you have some kind of crazy cam in this thing with domed pistons.....
"I am trying to run a small weiand blower from a 525sc and don't really want to tear down the motor to do a compression "ratio" calculation.."
Well, I understand your unwillingness to tear down a perfectly good engine, but it might be time well spent if you find out you have some kind of crazy cam in this thing with domed pistons.....
Last edited by Bajapred; 06-18-2007 at 04:51 PM.
#9
Registered
Thread Starter
It is different for each engine..take an engine that has 10:1 compression and one that has 7.5:1 and you might see the same cylinder pressure or you might not.....but take an engine that has 7.5 compression ratio with 120PSI cylinder pressure and raise the compression ratio, your cylinder pressure will raise as well, just because of mathmatics.....to know wether or not you have an engine that is a good candidate for a blower application, you must first know what the static compression is..just like Steve said
I know, that's why I was trying to narrow it down with mentioning that it was fresh. I'm not disagreeing with anyone just seems to me that these dynamic numbers would tell alot. Wouldn't the numbers change drastically between a 10:1 and 7.5:1 (both fresh)? Say 170 vs 120??
Oh well, its been a long day and maybe i'm not thinking straight. popping a head to start and see what I'm working with (all I know is TRW forged) and if I'm close (flat or reverse dome) I'll run it. Otherwise I'll just cam it down (was a rather large ultradyne) and run N/A till the winter.