Broke my bravo Bell Housing Assembly
#1
Registered
Platinum Member
Thread Starter
Join Date: Oct 2003
Location: New Baltimore , M.I.
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
Broke my bravo Bell Housing Assembly
Well yesterday I was out in my scarab. On the way back in I noticed that steering down the canal was loose ( I have full hyd steering) not normal for my boat. Well we pull the boat out and looked the bell housing assembly broke around the hindge pin on the starboard side... Is that normal, what could of caused it beside jumping waves?? Thanks Kyle
This is what broke / any one have one cheeper then this>>>
http://mercruiserparts.stemtostern.c...umber=%2017721
This is what broke / any one have one cheeper then this>>>
http://mercruiserparts.stemtostern.c...umber=%2017721
Last edited by kmiller; 06-24-2007 at 10:02 AM.
#2
Registered
Join Date: Dec 2005
Location: Middletown, Ct. 06457
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Well yesterday I was out in my scarab. On the way back in I noticed that steering down the canal was loose ( I have full hyd steering) not normal for my boat. Well we pull the boat out and looked the bell housing assembly broke around the hindge pin on the starboard side... Is that normal, what could of caused it beside jumping waves?? Thanks Kyle
This is what broke / any one have one cheeper then this>>>
http://mercruiserparts.stemtostern.c...umber=%2017721
This is what broke / any one have one cheeper then this>>>
http://mercruiserparts.stemtostern.c...umber=%2017721
#3
Registered
Platinum Member
Thread Starter
Join Date: Oct 2003
Location: New Baltimore , M.I.
Posts: 320
Likes: 0
Received 0 Likes
on
0 Posts
I was thinking the same. I will disconnect the ram and look tomorrow. It was a add on that I converted to full last year.. Thanks Kyle
#5
Registered
Join Date: Apr 2007
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
If you broke the Bell housing, than you better check the Ring very closely, make sure it's not cracked. I have seen alot of this. I do have a fix for a lot of them and have had very good results. We have some used parts, if you don't want to by new. Also if you want send the complete Gimbal I can possible update it, if that hasen't been done already. Give me a call at; 954 237 0332