Ilmor 625 or Merc 600SCI
#1
Registered
Thread Starter
Join Date: Jul 2006
Location: Fontana, CA
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Ilmor 625 or Merc 600SCI
building a Domn8er 25' deck boat and am considering either the Ilmor 625 or the Merc 600SCI motor. I like the Ilmor as it is different but what really matters is the performane. Which motor would you recomend and why?
#2
do you have anybody close thats qualified and or knows how to work on either?
Not just some socalled merc trained mech that all he knows is how to hook up a DDT
Not just some socalled merc trained mech that all he knows is how to hook up a DDT
__________________
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
.
The Only Time You Have To Much Ammo Is When Your Swimming Or On Fire.
#3
SeaRay Sundancer
Gold Member
Join Date: Nov 2005
Location: SW Missouri
Posts: 2,914
Likes: 0
Received 0 Likes
on
0 Posts
speedboat mag did a test comparing the two motors in an OL. They both hit the same mph, with the merc only a small bit faster. In the end the merc was chosen b/c the smartcraft system, service network, etc. Pick the one that you like best and have fun.
#4
Registered
Thread Starter
Join Date: Jul 2006
Location: Fontana, CA
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
#7
Registered
Thread Starter
Join Date: Jul 2006
Location: Fontana, CA
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
#8
I would go with the ilmor, not that I have any experience with either. The ilmor is NA with the merc supercharged, right? That's one more thing to fail on the merc. Keep in mind, with a blower, if the engine is making 600 at the crank, all the internals are working as hard as if it were NA and making 650-700 hp. It takes a lot of power to drive a blower.