jbutah

We are rigging twin 300xs on a 32' Midnight and are trying to find through hulls for the trim hoses. Our original plan was to run the hoses down through the bracket then through the transom, but could not find the correct fitting to go through the top plate of the bracket for the Mercury crimped hose fitting on the end of the trim hose. Now we are thinking about just routing them straight through the transom, but need some sort of fitting to get through. Not a standard through hull, but a something that the hose could go through and be sealed. Any ideas? Or if anyome knows where to find a fitting to take the hose through the top plate of the bracket, that would be even better.

jhiguy377

yeah, perhaps those compression through-hulls that are sold for the morse 33-c used for trim indicator cable;its close to the same diameter; i think rex marine, hardin or teague sell the fittings; had 'em on my old scarab and they looked and worked great. good luck -jeff

open87

i'd contact marc at bam marine , he makes trim lines so i'd think he would have a lead on thru hulls.

Audiofn

I think that both Stainless Marine and Lavorsi make somthing that will work for you.

Jon

jbutah

these are the hoses we could not find the fittings for





We ended up just fabricating our own through hulls




Mark, I would be interested to see how they did your Concept if you have time to take pics.

jbutah

Thanks for the photos.

Is the black thing the trim hoses go through watertight? How do the hoses go through your transom in the bracket?

Looks like Concept does a really nice job.

Audiofn

The black thing is water tight. I used one on my hydrostream. They work real well. Looks like they have hard line going around the tilt tube?

Jon

jbutah

Where did you get one of those black things?

jbutah

Mark,

Thanks I really appreciate you doing all that. Did you get yor lower unit fixed yet?

Thanks again,

John

jbutah

Good news on your boat!

No more pics neccessary, just trying to see how everybody does this riigging thing. Getting the engines hung on the transom is the easy part. It is the rest that is complicated.

Thanks again