Morse 33C Cable Ends
#1
Registered
Thread Starter
Join Date: Apr 2003
Location: Knoxville, TN
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
Morse 33C Cable Ends
Anybody have a part number to connect a Morse 33C cable (both ends are threaded) to a standard bravo shift bracket? I seem to have misplaced mine stripping the boat... Thanks
#2
Banned
Join Date: Sep 2001
Location: Deland, Florida
Posts: 25,191
Likes: 0
Received 0 Likes
on
0 Posts
I do know they come in different lengths. I had to put longer one's on when I swapped to Gaffrig controls. I got them from Trick.
I presume you are talking about these. They are called "pivots".
I presume you are talking about these. They are called "pivots".
#3
Registered
Thread Starter
Join Date: Apr 2003
Location: Knoxville, TN
Posts: 877
Likes: 0
Received 0 Likes
on
0 Posts
Cuda
That's not quite what I was looking for. I ended up finding them. The part number is 302123. Here is a link for them: http://www.go2marine.com/product.do?no=63628F
Here is a picture.
That's not quite what I was looking for. I ended up finding them. The part number is 302123. Here is a link for them: http://www.go2marine.com/product.do?no=63628F
Here is a picture.