4.5" stainless exhaust tips or just stainless pipe
#1
Registered
Thread Starter
Join Date: Aug 2007
Location: Sandown, NH - Sebago Lake Region, ME
Posts: 2,960
Likes: 0
Received 7 Likes
on
7 Posts
4.5" stainless exhaust tips or just stainless pipe
My boat has 4.5" OD exhaust pipes on it and I was looking for some 4.5" Slant cut exhaust tips or just some staight 4.5" exhaust tube and I will cut them myself. I checked all the big boys, dana, eddie, rex, hardin, imco and the common size is 4". ANy idea where I may be able to find 4.5" pipe.
#2
Gold Member
Gold Member
The only ones I found with a quick search are from Teague. TCM ST450TIP ......4.5" straight exhaust tip only. I am sure someone else has to sell these.
#5
I needed 5" exh tips and called all of the guys already mentioned. No dice ....
I called CP Performance and they offered to make some to my specs. I received them 2 weeks later. Polished stainless, $250 pair.
I called CP Performance and they offered to make some to my specs. I received them 2 weeks later. Polished stainless, $250 pair.
#8
Registered
Thread Starter
Join Date: Aug 2007
Location: Sandown, NH - Sebago Lake Region, ME
Posts: 2,960
Likes: 0
Received 7 Likes
on
7 Posts
I called Dana, and they can make some for me
"Dana Marine Products" If your reading this it might be nice to list somewhere on your webiste that you can provide sizes larger then 4". If it wasnt for this great website, I would have looked somewhere else as I was pretty convinced you only carried up to 4". Just my 2 cents.
"Dana Marine Products" If your reading this it might be nice to list somewhere on your webiste that you can provide sizes larger then 4". If it wasnt for this great website, I would have looked somewhere else as I was pretty convinced you only carried up to 4". Just my 2 cents.
#9
Thanks for the call. I'm the one who spoke to you, and the one who originally posted the availability.
For future reference, Dana Marine Products is very similar to a restaurant, it may not be on the menu, but we can usually do it.
We make hundreds of custom parts annually that just aren't popular enough to be listed on our site.
If anyone has any future custom part needs, give us a call, we can probably help you. At the least, we'd be able to guide you in the right direction.
Thanks again,
Bob @ Dana Marine Products
For future reference, Dana Marine Products is very similar to a restaurant, it may not be on the menu, but we can usually do it.
We make hundreds of custom parts annually that just aren't popular enough to be listed on our site.
If anyone has any future custom part needs, give us a call, we can probably help you. At the least, we'd be able to guide you in the right direction.
Thanks again,
Bob @ Dana Marine Products
Thread
Thread Starter
Forum
Replies
Last Post
boot
General Boating Discussion
19
04-28-2011 02:51 PM
G Man
General Boating Discussion
3
10-27-2005 02:03 PM
blackhawk
General Boating Discussion
2
08-05-2002 10:27 PM