new crane ignition or old one
#1
Registered
Thread Starter
Join Date: Jul 2007
Posts: 753
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
i have a hp 465 , running 731 crane cam and dart intake, i cloned a hp 500. have a rev limiter set at 5350,,, the question
is do i put a new hi 6m box in with a rev limiter set to 5600 or higher
will i see that much more in top end , i run a 27 mirage plus labbed, looking to hit 80 plus
is do i put a new hi 6m box in with a rev limiter set to 5600 or higher
will i see that much more in top end , i run a 27 mirage plus labbed, looking to hit 80 plus
Last edited by fastscarab22; 04-04-2008 at 06:42 PM.
#2
Registered
![Default](/forums/images/icons/icon1.gif)
A few years back my cousin had his 454cid engine on Tom Earhart's dyno with a Merc Thunderbolt distributor. We added a Crane Hi 6M ignition box and made a few pulls to 5500rpm or so.......no difference in power, but a really nice feature that an ignition box can do for you is give a mulitple spark at idle speeds which keeps plugs from loading up/fouling out.