mx 6.2 question
#2
Registered
![Default](/forums/images/icons/icon1.gif)
Don't know for sure, but I read on here a while back that the cam in the 6.2 is a Crane 104224. See link for specs.
http://www.cranecams.com/?show=brows...24&lvl=2&prt=5
http://www.cranecams.com/?show=brows...24&lvl=2&prt=5
#4
Registered
Thread Starter
Join Date: Jul 2007
Location: Lake Winnebago, MO, 43MM LOTO
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Making sure things are gonna work. There might be a problem with the amount of duration with the cam causing reversion. If so might have to go a different route!
#6
Registered
Join Date: Dec 2005
Location: Outlet of Canada Lake, NY
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
From Merc Service manual 24 supplement:
Engine 377 CID (6.2L)
Lifter Type Roller Hydraulic
Rocker Arm Ratio 1.50 to 1
Valve Lift
Intake 0.3114-.3153 (.79-.80)
Exhaust 0.3160-.3200 (.80-.81)
No duration spec.
From Merc Racing Service Manual 7:
Engine 377 CID (6.2L)
Lifter Type Roller Hydraulic
Rocker Arm Ratio 1.50 to 1
Valve Lift
Intake 0.510 (12.95)
Exhaust 0.530 (13.46)
Lobe lift +- 0.002 (0.051) I= 0.340 (8.636) E=0.3534 (8.9763)
Dur @ 0.050 I=222 E=230
Engine 377 CID (6.2L)
Lifter Type Roller Hydraulic
Rocker Arm Ratio 1.50 to 1
Valve Lift
Intake 0.3114-.3153 (.79-.80)
Exhaust 0.3160-.3200 (.80-.81)
No duration spec.
From Merc Racing Service Manual 7:
Engine 377 CID (6.2L)
Lifter Type Roller Hydraulic
Rocker Arm Ratio 1.50 to 1
Valve Lift
Intake 0.510 (12.95)
Exhaust 0.530 (13.46)
Lobe lift +- 0.002 (0.051) I= 0.340 (8.636) E=0.3534 (8.9763)
Dur @ 0.050 I=222 E=230
#7
#8
Registered
Thread Starter
Join Date: Jul 2007
Location: Lake Winnebago, MO, 43MM LOTO
Posts: 220
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Really need the duration @ .050, stainless marine short risers to work with the corsa Q&Q. I think the merc racing specs are for the scorpin I'm needing specs on the regular black mx 6.2
#9
Registered
Join Date: Dec 2005
Location: Outlet of Canada Lake, NY
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
I think the merc racing specs are for the scorpin I'm needing specs on the regular black mx 6.2