Watch this block machining process!
#1
Registered
Thread Starter
Watch this block machining process!
#4
Registered
Join Date: Jul 2007
Location: NY-NC
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Programming is probably pretty straight foward with all the exotic software thats out there. Now if it was being run on an Old Mattsurra or Monarch-VMC-75 with Fanuc 5, or GE-550 control and they were MDI'ing all the info in and programming without cutter comp., I'd be giving mad props! Damn computer geeks, What happened to the true craftsmen? lol!
#7
Registered
fantastic, thanks Kurt! Sure would have been allot less whittling if they started with a casting but my guess is that wasn't the point.
When are you rolling into Miami? I'll be in the 14th.
When are you rolling into Miami? I'll be in the 14th.
#8
this is not as much drilling but cool to see anyway...how to make a ferrari v12
http://www.youtube.com/watch?v=sRKL6hDng-Q
http://www.youtube.com/watch?v=sRKL6hDng-Q