Roller Rocker Arms
#11
Registered
Thread Starter
Join Date: Nov 2005
Location: Lampertheim Germany
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Hi Biggus
maybe you got just more torque not mmany Hp. But with more torque it was maybe posible to spin a little bigger propeller with a little less RPM but little more Speed
Have you ever tryed out
maybe you got just more torque not mmany Hp. But with more torque it was maybe posible to spin a little bigger propeller with a little less RPM but little more Speed
Have you ever tryed out
#12
Registered
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
1.8 Crane gold rockers part number 13755-16
http://www.jegs.com/webapp/wcs/store...44608_-1_10231
Good luck with the project. It shoudl wake that engine up a little, but don't wait to long to check the springs.
http://www.jegs.com/webapp/wcs/store...44608_-1_10231
Good luck with the project. It shoudl wake that engine up a little, but don't wait to long to check the springs.
#14
Registered
Join Date: Sep 2007
Location: Toronto, Canada
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts