jlaudio29

I have a 454 with thru hull exhaust, it currently has the T section on them to make it so i can put all the exhaust through the prop, but i never do that, and cant think of any reason id have to, could i just put a rubber cap on the oval part where the bellow is?

ZXXX Donzi

I put a cap on mine when I converted my Donzi to through hull. It works fine.

THLWL

You can cap it. My bull horns weighed a lot. I removed the "y" diverters and bull horns. Sounds much better and lost a lot of weight. You can buy a block plate or make one.

jlaudio29

and links to someone that sells a blockplate so i can buy/ probably fabricate one.

Boatally Insane

http://www.mercruiserparts.com/Show_...CK%2DOFF+PLATE



Doug

jlaudio29

thanks for the pic, i wonder how important that indention is... not that i cant make it, it would just be a slight pain lol

hoozeyurdaddy

thats the new stamped version, they used to be just a flat piece of aluminum about 3/8 or so thick, It don't need the indentation in it.

jlaudio29

awsome thanks for the info

jlaudio29

ok so how in the heck do you get to those 4 bolts to pull that stuff outta there ...

Bryan Rose

Pull the motor......................fun fun fun