Rebuild raw water pump body?
03-02-2008, 06:58 PM
#1
Registered
Thread Starter
Join Date: Aug 2006
Location: IAD/FLL
Posts: 2,090
Likes: 0
Received 0 Likes
on
0 Posts
Rebuild raw water pump body?
Not the impeller, but the actual pump body. '91 Mark IV Bravo. I've got one that the shaft is turning rough and a little notchy. The parts diagram shows the internals for the old 2-piece body it looks like. Not sure if the parts are the same or not.
03-02-2008, 07:43 PM
#2
Registered
Mike .... I rebuilt one and it worked out fine .... We crossed all the parts from the local bearing Company ... it was about 25-30 bucks .. you can get the parts from Merc though ... seems it was about 50.00 ...
you do need access to a press ....
you do need access to a press ....
03-02-2008, 08:09 PM
#3
Registered
Thread Starter
Join Date: Aug 2006
Location: IAD/FLL
Posts: 2,090
Likes: 0
Received 0 Likes
on
0 Posts
