factory merc tb modules #1g22a v6-14
04-13-2008, 03:38 PM
#1
Registered
Thread Starter
Join Date: Sep 2006
Location: CHICAGO
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
factory merc tb modules #1g22a v6-14
these are fac merc tb IV IGN MODULES,#1G22A V6-14 MODULES,anybody know the advance curves ,redline and total timing on these , i have them on a set of 588'' engines and the dyno guy needs to know more about them
04-13-2008, 04:15 PM
#2
Registered
Thread Starter
Join Date: Sep 2006
Location: CHICAGO
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
ok,i figured it out 14degs of advance ,but on a v8 only 8-10 degs,, now for question #2 do i want to run these on a 588'' 9.6 to 1 eng n/a,735lift cam, because of having to start timing at 22degs to get a total of 32degs timing
04-13-2008, 05:55 PM
#3
Charter Member # 55
Charter Member
Those are probably the best modules for your application. The high initial advance will help with idling around the docks and its not so high that it will cause hot starting issues.
They will be at full advance by 2000-2500rpms.
They will be at full advance by 2000-2500rpms.
04-14-2008, 11:52 AM
#6
Charter Member # 55
Charter Member
There is no rev limiter built into TB IV V8 modules either. The rev limters used with TB IV's were only installed on blue engines and were a separate component.
