Anybody know who has a Crane 168741 Cam
05-13-2008, 07:52 PM
#1
Registered
Thread Starter
Anybody know who has a Crane 168741 Cam
Trying to find a new one.
I found a 139021 but that is for a Gen 4 and can't use cam retainer and stock cover.
Called Crane and they said they don't even have a time frame as when they will have more.
I tried Summit(they said end of June thru Crane) and Jegs no luck.
Might even consider a used one.
Thanks for any help.
I found a 139021 but that is for a Gen 4 and can't use cam retainer and stock cover.
Called Crane and they said they don't even have a time frame as when they will have more.
I tried Summit(they said end of June thru Crane) and Jegs no luck.
Might even consider a used one.
Thanks for any help.
Platinum Member
05-14-2008, 03:18 PM
#5
Banned
Join Date: Jan 2005
Location: Tri-Cities, TN
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Trying to find a new one.
I found a 139021 but that is for a Gen 4 and can't use cam retainer and stock cover.
Called Crane and they said they don't even have a time frame as when they will have more.
I tried Summit(they said end of June thru Crane) and Jegs no luck.
Might even consider a used one.
Thanks for any help.
I found a 139021 but that is for a Gen 4 and can't use cam retainer and stock cover.
Called Crane and they said they don't even have a time frame as when they will have more.
I tried Summit(they said end of June thru Crane) and Jegs no luck.
Might even consider a used one.
Thanks for any help.
05-14-2008, 03:51 PM
#7
Registered
05-14-2008, 05:04 PM
#9
Registered
Thread Starter
The resource power of OSO.
Thanks Guys
I did not want to wait for a custom grind one, trying to get it together this weekend.
My local engine shop found one this morning a state away and it will be here tomorrow.
Im just a little worried about them breaking. I have read some old posts of that happening.
Anybody know if they cleared that problem up?
Thanks Guys
I did not want to wait for a custom grind one, trying to get it together this weekend.
My local engine shop found one this morning a state away and it will be here tomorrow.
Im just a little worried about them breaking. I have read some old posts of that happening.
Anybody know if they cleared that problem up?
05-14-2008, 09:46 PM
#10
Where To
VIP Member
Join Date: Nov 2001
Location: Alexandria Bay, NY 1000 Islands
Posts: 2,517
Likes: 0
Received 3 Likes
on
3 Posts
Just make sure it is copper colored!
Thay had a bad batch of cores back in 2002-2004. (and they were black colored)
Shouldn't be a problem now.
Dave
Thay had a bad batch of cores back in 2002-2004. (and they were black colored)
Shouldn't be a problem now.
Dave
__________________
Air, Sea, and Land...Exploring the planet in 3-D!
Air, Sea, and Land...Exploring the planet in 3-D!
