Code 73 w/pcm 555 496HO
05-18-2008, 06:26 PM
#1
Registered
Thread Starter
Code 73 w/pcm 555 496HO
Was running along this weekend. seas were a tad rough.
Running about 4000RPM when the system view displayed a soft alarm. 2 Beeps every minute or so. Had reduced pwr.
The system view displayed code 73 somthing like "inj open ckt."
I stopped and did a visual.did not see anything in the viw unplugged etc...
Got underway. running about 3000 heading home. After about 10-15 minutes the system view did not show the alarm and engine was back to full power. Never faulted again.
Any input to the original fault of 73. Does the pcm clear itself after time?
Thanks
Dennis
Running about 4000RPM when the system view displayed a soft alarm. 2 Beeps every minute or so. Had reduced pwr.
The system view displayed code 73 somthing like "inj open ckt."
I stopped and did a visual.did not see anything in the viw unplugged etc...
Got underway. running about 3000 heading home. After about 10-15 minutes the system view did not show the alarm and engine was back to full power. Never faulted again.
Any input to the original fault of 73. Does the pcm clear itself after time?
Thanks
Dennis
