Throttle Adjustment
#32
Registered
T38 ....my post wasn't meant to be negative but it did sound that way ... .... Just a comment about the stroke of the cable was not a solution to this prolem ....
#33
Registered
Cool. THANKS! But if you were to change the stroke/travel of the cable the additional bracket would not have been neccessary and the carb and throttle combination could be made to work. And when I learned about the cables, after lots of running place to place lalala, I found I could walk in and say this is what I have, this is what I want to do and I was Literally done and on my way in 15 minutes.
#34
Registered
Join Date: Oct 2000
Location: Knoxville,TN, USA
Posts: 374
Likes: 0
Received 0 Likes
on
0 Posts
throttle
I'm a little unclear on one thing guys. But, if you move the cable to the hole farthest from the shaft on the carb, you lessen the movement on the carb for the same handle throw, which was the issue, not make it greater, which is what I understood the problem to be. Clearly, the opposite will be true from the throttle position.
Just my 2 cents worth.
Just my 2 cents worth.
Last edited by deboatmon; 06-16-2008 at 04:26 PM.
#35
Registered
I'm a little unclear on one thing guys. But, if you move the cable to the hole farthest from the shaft on the carb, you lessen the movement on the carb for the same handle throw, which was the issue, not make it greater, which is what I understood the problem to be. Clearly, the opposite will be true from the throttle position.
Just my 2 cents worth.
Just my 2 cents worth.