oil type
#1
Registered
Thread Starter
Join Date: Jan 2007
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
hey guys,
i am about to put new my new engine back in the boat and was wondering what to use for oil for now,i usally run and will run royal purple after i get some time on this motor,but for now i was thinking penzoil 20/50 ???any input is great,also thermostats 140 or a 160?
i am about to put new my new engine back in the boat and was wondering what to use for oil for now,i usally run and will run royal purple after i get some time on this motor,but for now i was thinking penzoil 20/50 ???any input is great,also thermostats 140 or a 160?
#2
Registered
Join Date: Mar 2007
Location: Kansas City
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Flat tappet camshaft or hydraulic roller (and new or used camshaft?)
New flat tappet cam and oil subject is all over - make sure to use something with a good load of ZDDP (Zinc) - I broke my last one in on Castrol HD30 and a bottle of comp cam's break-in lube...
New flat tappet cam and oil subject is all over - make sure to use something with a good load of ZDDP (Zinc) - I broke my last one in on Castrol HD30 and a bottle of comp cam's break-in lube...
#3
Charter Member #1171
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
![Default](/forums/images/icons/icon1.gif)
any good straight 40 weight,,, I run Valvoline VR1 racing
__________________
I want to live in a world where a chicken can cross the road and not have its motives questioned.
I want to live in a world where a chicken can cross the road and not have its motives questioned.
#4
![Arrow](/forums/images/icons/icon2.gif)
A break-in oil is simply one with a big dose of anti-wear additives and good detergency. ZDDP etc...you want to minimize initial wear get the seals to seal etc...it's for rollers and non-roller cams...
Since you are going to use Royal Purple...(good choice) use this for break-in...20 hours then Switch to 20W-50 RP.
http://www.royalpurple.com/breakin-oil-m.html
Since you are going to use Royal Purple...(good choice) use this for break-in...20 hours then Switch to 20W-50 RP.
http://www.royalpurple.com/breakin-oil-m.html
Last edited by Hydrocruiser; 06-09-2008 at 08:55 PM.
#10