Engine Stands / Shipping Crates?
#1
Charter Member #34
![](https://www.offshoreonly.com/forums/images/icons/charter_member_star.gif)
Thread Starter
Join Date: Oct 2000
Location: Beautiful North Carolina
Posts: 7,151
Likes: 0
Received 2 Likes
on
2 Posts
![Default](/forums/images/icons/icon1.gif)
I need two good quality engine stands or shipping crates for a couple of big block engines.
Need to safely move two engines a few hundred miles.
Who has them?
Need to safely move two engines a few hundred miles.
Who has them?
#2
Registered
![Default](/forums/images/icons/icon1.gif)
Dock,
Are you moving them yourself ? In a pickup ? We have had very fgood luck using these: http://store.summitracing.com/partde...0&autoview=sku
Only thing I would suggest is NOT using the wheels while transporting in the bed of a truck. Otherwise they seem to work just fine. Should be available at almost any performance parts store.
Also, if you have a very deep oil pan, make sure to measure the stand first.
Are you moving them yourself ? In a pickup ? We have had very fgood luck using these: http://store.summitracing.com/partde...0&autoview=sku
Only thing I would suggest is NOT using the wheels while transporting in the bed of a truck. Otherwise they seem to work just fine. Should be available at almost any performance parts store.
Also, if you have a very deep oil pan, make sure to measure the stand first.
#3
Platinum Member
![](https://www.offshoreonly.com/forums/images/icons/platinum_member_star.gif)
Join Date: Sep 2002
Location: Millersville,MD
Posts: 381
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Doc,
Check out: http://www.stumpysfabworks.zoomshare.com/
He uses top notch casters if you need them and he can make to order for you. He made me two sets extra wide and tall for oil pan clearance and add tie down points. Straight up guy
Check out: http://www.stumpysfabworks.zoomshare.com/
He uses top notch casters if you need them and he can make to order for you. He made me two sets extra wide and tall for oil pan clearance and add tie down points. Straight up guy