496 ho plug wires are $500!!! Please read
#12
Registered
![Default](/forums/images/icons/icon1.gif)
or you could try that self bonding electrical tape , any ACE hardware sells it... just clean with acetone and strech the tape ,it's then activated..
i used it on my battery cable on my truck on a terminal and works fine...
i used it on my battery cable on my truck on a terminal and works fine...
#14
![Default](/forums/images/icons/icon1.gif)
I just bought a 26ft cat with a 496ho...still trying to dial everything in. with 4 passengers I am turning 4500 rpm with a 26p, bravo 1x, 1.5 gears and getting 65mph. My plans were to install headers and lab the prop. When I was installing the headers I noticed a ripped boot on one of the plug wires. This could have been there already or I may have done it when installing the headers.
I have a few question...please help:
could this wire problem cost me 400rpm?
Could I repair the rip in the boot..if so how?
Is there anything special about these wires since they cost $500 for the set from merc?
can I use aftermarket wires like MSD marine?
I have a few question...please help:
could this wire problem cost me 400rpm?
Could I repair the rip in the boot..if so how?
Is there anything special about these wires since they cost $500 for the set from merc?
can I use aftermarket wires like MSD marine?
They are so expensive because the performance spark plug wires have a unique stainless steel wire wound ("Mag Wire") conductor with a Dupont Kevlar core.
http://www.vitekperformance.com/shop...ame=MERCRUISER
Last edited by Hydrocruiser; 06-14-2008 at 09:12 PM.
#15
Registered
![Default](/forums/images/icons/icon1.gif)
I would go to MSD they are very good wires....and you can bet merc does not make those 500 ones either....years ago I worked at a boat dealership, was doing a engine job, was opening one of merc high dollar head gaskets, only to see that it was a victor gasket just dropped on a merc package and trippled the $$$
#17
Registered
![Default](/forums/images/icons/icon1.gif)
Yes, a plug wire can cost you 400 RPM. Did on my boat when one fell off. Other than the lack of RPM, you could not tell the plug wire was off. Make your own replacement wire. I used to make my own wires all the time back in the day.
#19
Registered
Join Date: Jan 2004
Location: San Diego, California
Posts: 2,777
Likes: 0
Received 6 Likes
on
6 Posts
![Wink](/forums/images/icons/icon12.gif)
For anybody who is interested, Raylar has many sets of new take off Mercury plug wires for the 496 engines in stock and we sell them for $75 per set plus shipping for those who need them. Need 496 stuff, remember one name, Raylar
Best Regards,
Ray @ Raylar
Best Regards,
Ray @ Raylar
#20
![Default](/forums/images/icons/icon1.gif)
Merc really sux sometimes. Would be nice if a Merc rep would chime in from time to time and justify/explain the reason/s for prices they charge for some of their products.