hp 500 cam
#4
Registered
![Default](/forums/images/icons/icon1.gif)
HP500 (hydr roller) and Bulldog 540 (hydr flat tappet) cams are very different - not even same type.
In my notes I have the Bulldog 540 as having:
Crane Flat Tappet Hydraulic Cam
240, 250 at .050"
.559", .578" lift
110LSA
Cam installed 5 advanced (105ICL)
I believe grind # H-240/329-2-10 ???
=================
Always double check someone's notes befor you 100% believe it.
In my notes I have the Bulldog 540 as having:
Crane Flat Tappet Hydraulic Cam
240, 250 at .050"
.559", .578" lift
110LSA
Cam installed 5 advanced (105ICL)
I believe grind # H-240/329-2-10 ???
=================
Always double check someone's notes befor you 100% believe it.
![Big Grin](/forums/images/smilies/biggrin.gif)
Last edited by SB; 07-03-2008 at 07:39 AM.
#5
sandman
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Thread Starter
Join Date: Mar 2006
Location: rockingham, nc
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Sorry, I thought the bulldog was the same as an hp 500. I need specs for the hyd roller. This is for a carbed engine. Thanks.
Last edited by sandcraft; 07-03-2008 at 08:03 AM.
#6
Registered
![Default](/forums/images/icons/icon1.gif)
Merc HP500 Carb
Grind#HR-284-2S-10IG
Adv 284, 292 at .004” Lift with 1.7 .576 / .598
At .050” 222, 230
ICL 105, ECL 115
LSA 110
Grind#HR-284-2S-10IG
Adv 284, 292 at .004” Lift with 1.7 .576 / .598
At .050” 222, 230
ICL 105, ECL 115
LSA 110