Racing Oil Filters
#51
Registered
![Default](/forums/images/icons/icon1.gif)
Been running the K&N Performance Gold HP 6002 which is also a 2 qt. filter the last couple years with no problems. I also run a high volume pump and have the block by pass plugged. 100% of the oil goes through the filter. They filter down to 10 microns and have a max burst pressure of 550psi.
http://www.summitracing.com/parts/KNN-HP-6002/
The Nappa Gold 1794/Wix 51794 filters down to 21 micron and have a max burst pressure of 270psi.
http://www.wixfilters.com/filterlook...asp?Part=51794
http://www.summitracing.com/parts/KNN-HP-6002/
The Nappa Gold 1794/Wix 51794 filters down to 21 micron and have a max burst pressure of 270psi.
http://www.wixfilters.com/filterlook...asp?Part=51794
#53
Registered
![Default](/forums/images/icons/icon1.gif)
The Amsoil / Donaldson is an EA076. I've been running them for a couple of years, I also attach a high strength magnet to the bottom. My oil pressure stays constant before and after changes. My oil is so clean that I can hardly see it on the dipstick. You get the best of both worlds, high flow and superior filtration.
#55
Registered
![Default](/forums/images/icons/icon1.gif)
Just remember that the "R" on racing filters stands for Reduced Filtration.