TRS oil cooler line fittings...
#1
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Thread Starter
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,636
Likes: 0
Received 209 Likes
on
133 Posts
![Default](/forums/images/icons/icon1.gif)
Are there any restriction issues with these stock fittings? the lines are 5/8" and the fittings are big, I am chasing some issues that could be oiling and want to know how these fittings are, they have been fine for 21 yrs but just getting opinions.
Do they make a nice radiused fitting so I can keep my stock hoses?
Do they make a nice radiused fitting so I can keep my stock hoses?
![](http://i36.photobucket.com/albums/e41/86lxmustang/108_5450-1.jpg)
#2
Registered
Join Date: Dec 2007
Location: Detroit River/ lake Erie
Posts: 782
Likes: 0
Received 0 Likes
on
0 Posts
![Default](/forums/images/icons/icon1.gif)
Hello,
You want -12 or run the bigest lines you can do not run anything smaller than you have now. I have to replace all my line too. do you have a parker store around they will help you.
You want -12 or run the bigest lines you can do not run anything smaller than you have now. I have to replace all my line too. do you have a parker store around they will help you.
#3
Gold Member
![](https://www.offshoreonly.com/forums/images/icons/gold_member_star.gif)
Thread Starter
Join Date: Oct 2005
Location: Olmsted Falls,Ohio Marblehead,Oh
Posts: 11,636
Likes: 0
Received 209 Likes
on
133 Posts
![Default](/forums/images/icons/icon1.gif)
I am not looking for smaller, I am just making sure this should be fine, like I said, it is factory 400 Merc.. I figure it should be fine, i can redo oil system over winter if needed, I cannot get into it now being in the middle of July.. $$$$